Jump to content
SAU Community

Front Differential Not Working R32 Gtr?

Takahashi GTR

By Takahashi GTR,
in Victoria

 Share

Recommended Posts

Takahashi GTR Rising Star

Takahashi GTR

Posted
  • Author
Posted
What do you mean the front differential is not working? :)

I just got my car back after a 5 month Rebuild, I used to drive it in RWD alot of the time. We put the fuse back in the 4WD and it doesnt work?

Any ideas as to why?

femno Grand Master

femno

Posted
Posted

Is the 4WD light on the dash on?

Is there any fluid in the reservoir in the boot?

Is the front driveshaft in?

Did they remove the gearbox from the car during the rebuild?

If so did they bleed the system after refitting the gearbox?

Takahashi GTR Rising Star

Takahashi GTR

Posted
  • Author
Posted
Is the 4WD light on the dash on?

Is there any fluid in the reservoir in the boot?

Is the front driveshaft in?

Did they remove the gearbox from the car during the rebuild?

If so did they bleed the system after refitting the gearbox?

Yes, the 4WD light is on, there is fluid in the boot. Im unsure about the front drive shaft though. They did remove the gearbox from the car during the rebuild, But again unsure if they bled the system after refitting the gearbox.

Thanks foryour help mate.

femno Grand Master

femno

Posted
Posted

Have a look under the car to see if the front shaft is in.

Find out if the system is bled.

If not have it bled properly as per Service Manual.

If those dont work then get hold of a GTR Service Manual or Google it up, start the car, and if the 4WD light is lit, stick your head in the boot and look to see what the small LED is doing on the 4WD computer.

If the 4WD light on the dash is on, the LED will flash certain sequences to give a number (aka fault/error code), once you know the number cross-check with the manual and thats the problem (basically).

ujin Community Regular

ujin

Posted
Posted

i has the same prob as u. is yur RPM working? did u just have a boost controller installed? is there power in the fuse box, where the fuse is? we just did a whole day of troubleshooting. haha.. found out it was due to the tacho (some wireing prob). finally got to dyno it. haha

Takahashi GTR Rising Star

Takahashi GTR

Posted
  • Author
Posted
i has the same prob as u. is yur RPM working? did u just have a boost controller installed? is there power in the fuse box, where the fuse is? we just did a whole day of troubleshooting. haha.. found out it was due to the tacho (some wireing prob). finally got to dyno it. haha

My RPM is working, I did just have another boost controller installed yes, there is power in the fuse box. So it was a wiring fault or installation error?

ujin Community Regular

ujin

Posted
Posted

i agree with ronin. check the number of flashes, and look at the manual. or u might want to check the wireing of the boost controller to the ecu. coz the source to my prob was just some minor wireing which accedentally got disconnected.

check the fault code on the 4WD computer.

get the manual, match the number of light flashes.

it will tell you what is stuffed.

awsomdave Newbie

awsomdave

Posted
Posted

hi have sim trouble but min is i had a switch put in 4/to 2 drive melted the fuise bugger will swop the lot out of my other gtr .be 4 that leeking pipe on gear box had the lightes 4wd/abbes onthere is 5 pontes to bleed on the sistom no spell 4 s..it sorry good luke dave

llama_au Grand Master

llama_au

Posted
Posted
hi have sim trouble but min is i had a switch put in 4/to 2 drive melted the fuise bugger will swop the lot out of my other gtr .be 4 that leeking pipe on gear box had the lightes 4wd/abbes onthere is 5 pontes to bleed on the sistom no spell 4 s..it sorry good luke dave

English translation please :)

some_cs_student Veteran

some_cs_student

Posted
Posted

Can't help but attempt to translate, I'll just add some imagination to the random fragment of text above...

hi have sim trouble but min is i had a switch put in

"I had the same problem, with a switch that was put in "

4/to 2 drive melted the fuise bugger will swop the lot out of my other gtr

" to convert my GTR to RWD, I'm rich so I have 2 GTR's", just kidding about that last part :laugh:

.be 4 that leeking pipe on gear box had the lightes 4wd/abbes onthere is 5 pontes to bleed on the sistom no spell 4"

"I had a leaking pipe near the gearbox, probably the transfer case pipe, had to bleed the system in 4 points(? what the?)"

awsomdave Newbie

awsomdave

Posted
Posted (edited)

hi yes i told by nissan dealer there is 5 bleeding pointes fore the hicces sa 4 the beeing ritch my 1 st 1got bent on a crapp trailer $18000 +$$$ to fiske so i say f it buy 1 more have spare paretsgood i deer

Edited by awsomdave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Great pic  
×
×
  • Create New...