Jump to content
SAU Community

Recommended Posts

Hey all,

Just want to compare what results other people acheived from BMT Dyno.

Please also state the mods you have.

Anyway I go first.. Just had my car dynoed at BMT , im sure Sam will remember me ;)

Car:

------

-Skyline R33 GTST Type-M

Mods:

-------

-2 Stage Boost Controller (set to 11 psi, no spikes)

-3" Dump/Front pipe

-3" Cat

-3" Exhaust

-Apexi SAFC tuned from Sam himself

-NGK Plenium Spark Plugs gapped to 0.8mm

Result:

---------

-127rwkw

Is that abit too low? I know that the BMT dyno is more accurate than all the other Dynos out there and that other dynos run higher. Just wanna see what other people had acheived from BMT :P

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/
Share on other sites

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

ive heard it is more conservative.. i read somewhere a car was put on the bmt dyno and it got well i forget :P but then the same car was put on the dyno at auto salon and it was much higher. Does the word conservative mean more accurate?

i was rather shocked at 127rwkw i must say. the car should me more then that stock

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563745
Share on other sites

It is always hard to say more accuracy but I think all dynos are conservative compared to Autosalon. I dont know about BMT's as I use Ben at RacePace and Simon's at Nizpro that are different but come up with very similar figures that are usually consevative by other dyno's standard.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563794
Share on other sites

yes dude, everything seems ok. turbo spinning, only got stock intercooler though :P i was shocked myself also.. its really weird, timed myself 0-100km using the apexi RSM and scored 5.8sec? my car isn't that sloww as i can feel the pull in it but why 127rwkw that puzzles me.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563807
Share on other sites

Hey Eric 127rwkw is a bit low considering ur car is an auto with auto u loose 10-15rwkw easy I got 140rwkw when mine was auto with 11psi boost 3" cat back zorst and tuned safc on BGT's dyno about 2yrs ago it could be the dyno itself. ur 0-100 time is pretty respectable so u might actually have more than what the dyno shows that would be my theory anyway.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563971
Share on other sites

guys just to let u know most older dynos are not very accurate and generally put out a lot higher readings... all the new dynos that are around are genuine readings which u should really go by... it may only be low 120s but i bet it will beat or stay up with cars that have dynoed 180rwkw on other dynos.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-564030
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...