Jump to content
SAU Community

Recommended Posts

my cigarette lighter is not working! i am pretty sure it is a blown fuse but i have had a look in the fuse box under the bonnet and in there all is fine. My manual says there is a internal fuse box in the passenger compartment but i cannot find it at all! please help

Link to comment
https://www.sau.com.au/forums/topic/267068-interior-fuse-box/
Share on other sites

im pretty sure my cig fuse has cacked itself too, was tryin to fix it today but cant find it, attached a pic of the box undr bonnet incase someone can point out somethin that i cant understand...

let me kno if u find it luke!

post-43914-1240657197_thumb.jpg

Edited by 1R34SON
my cigarette lighter is not working! i am pretty sure it is a blown fuse but i have had a look in the fuse box under the bonnet and in there all is fine. My manual says there is a internal fuse box in the passenger compartment but i cannot find it at all! please help

Bro, it seems like people have been replying but not answering your question. You want to know where the interior fuses are,right? ok, sit in your driver's seat and place your hand, palm facing up on the trim to the right of your steering wheel, but a bit lower, now feel with your fingers for a dug out part, your 4 fingers at the bottom should go into it. Pull that back and a part of the trim will come off. your fuses are in there. Your cigarrete lighter fuse will be the 4th or 5th one on the right column (thers 2 colums of fuses) its a blue 15A fuse. Mine went the other day. good luck

cheers

Bro, it seems like people have been replying but not answering your question. You want to know where the interior fuses are,right? ok, sit in your driver's seat and place your hand, palm facing up on the trim to the right of your steering wheel, but a bit lower, now feel with your fingers for a dug out part, your 4 fingers at the bottom should go into it. Pull that back and a part of the trim will come off. your fuses are in there.

Sorry thought you were asking *which* fuse not where is the box.

As above, take a look with the drivers door open from outside the car, its not that hard to find the fusebox cover...its the same area on most cars I've seen...(see above)

a bit lower, now feel with your fingers for a dug out part, your 4 fingers at the bottom should go into it

Just do wat Benzino33 says. Come on prove u r a man lol :D:down::P:)

I'm not sure a bout the 4 fingers :) It's a japanese car so it's asian lol

gona take a look for that fuse box 2moro.. till then i managed to partially fix my cig lighter.. lol what i mean is that my tail lights n dash lights went out other night so i swapped the horn fuse with the tail light fuse and the tail lights and dash were fixed and the cig lighter now works.. ... but only when i turn my head lights on.. when i turn my head lights off anything plugged into cig lighter also switches off, wtf? someone please explain..? everything else is normal

gona take a look for that fuse box 2moro.. till then i managed to partially fix my cig lighter.. lol what i mean is that my tail lights n dash lights went out other night so i swapped the horn fuse with the tail light fuse and the tail lights and dash were fixed and the cig lighter now works.. ... but only when i turn my head lights on.. when i turn my head lights off anything plugged into cig lighter also switches off, wtf? someone please explain..? everything else is normal

Why u mixing fuses? U might be using the wrong Amp fuse that wont work properly. make sure theyre the right numbers

I swapped the horn n tail light fuses as i was driving long distance at night and didnt wana get pulled over for no tail lights (another driver on freeway alerted me bout my tail lights being out). The horn fuse was the one i figured i wouldnt need as much and being both 10amps i swapped them.

I bought a new 10amp fuse for the horn today,horns working but the cig lighter doesnt work unless my headlights are on.. i duno whats goin on. at least the cig lighter works at night tho now lol. might see a sparky if the interior fuse seems good

Edited by 1R34SON
  • 3 weeks later...
my cigarette lighter is not working! i am pretty sure it is a blown fuse but i have had a look in the fuse box under the bonnet and in there all is fine. My manual says there is a internal fuse box in the passenger compartment but i cannot find it at all! please help

It's under the dash by the driver's door. You should be able to see it pretty easily--right where the hood (bonnet) release lever is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...