Jump to content
SAU Community

Recommended Posts

Decent turnout... too bad by the end we were 4 cars in total. Woo!

Thanks for the cruise Kahli (and donuts whoever brought em lol) and happy b-day Brad :P

i made the donuts at my work for Kahli

yeh was a great cruise

was your's the car with white wheels???

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

bah I rocked up in a white Honda Integra - no one recognizes that :D everyone knows/seen the typevu R33 though lol

I knew you were there lol.

Mind you the only people I could put names to would be Vu, Chad and Luke. Oh and Kahli after she said who she was...

Hey Guys thanks for rocking up. We had just over 30 cars that rocked up, so wasnt too bad (:

Sorry about the map mistake at one stage of the cruise so people realised we went up lofty area so the rest of us met up there. Had a pretty good hills run except for my sisters friend kept vomiting up through the hills hahaha

Hey Guys thanks for rocking up. We had just over 30 cars that rocked up, so wasnt too bad (:

Sorry about the map mistake at one stage of the cruise so people realised we went up lofty area so the rest of us met up there. Had a pretty good hills run except for my sisters friend kept vomiting up through the hills hahaha

Chicks Dig Vomit

-D

Hey Guys thanks for rocking up. We had just over 30 cars that rocked up, so wasnt too bad (:

Sorry about the map mistake at one stage of the cruise so people realised we went up lofty area so the rest of us met up there. Had a pretty good hills run except for my sisters friend kept vomiting up through the hills hahaha

I lol'd.

Haha yeah well she loved going through the hills but kept getting car sick. Everytime they tried to catch up to us her friend had to get out the car to vomit lol

Edited by Lil Miss 32
Hey Guys thanks for rocking up. We had just over 30 cars that rocked up, so wasnt too bad (:

Sorry about the map mistake at one stage of the cruise so people realised we went up lofty area so the rest of us met up there. Had a pretty good hills run except for my sisters friend kept vomiting up through the hills hahaha

Yeah I was following a guy from NS in a black 32 with no wing and white rims, but we went the wrong way, then I lost him lol. Knew you were going to Lofty but I figured by the time I got there you would have already left haha.

Was a good cruise for the part I was on anyway :P

Yeah I was following a guy from NS in a black 32 with no wing and white rims, but we went the wrong way, then I lost him lol. Knew you were going to Lofty but I figured by the time I got there you would have already left haha.

Thats where you made your mistake ... you followed a guy from NS :P

^^^It was still a Skyline though.

I had to leave from Hallet Cove (was random as driving through the back streets with drunks walking the street haha). I would've gone on further except I had to take my passengers home. Was still alright to see the cars tho.

I was leading when we got to the lander rd->candy rd mix up. So i had to decide to go left or right.

Here is where i went.<-click for map

I chose right to goto chandlers via kenihans.(I should have went left and made a U turn to get to candy.)

Got to point-C(refer to the above map^) an was flashed by the car behind me to turn around.

Turned around, got to point-D witch Kahli and another car was parked.

They proceeded to turn around an go back to the south rd.

So im thinking.. Theres no point going back that way, i'll go wait where everyone should be going once they check a map book or something..

Waited at candy/chandlers stop sign for a bit then at point-G turned car off, after awhile put lofty+each turn&my home into the gps. It said i'd be home at 12:35, so got going to lofty since i had to work sunday.

The black bodykited r34 or r33? that left foodland early got to lofty at the same time as me 11:50. I told them what happened and i had to go home.

Overall the cruise was good(and enlightening)! And featured a road that i've always wanted to see on a cruise. Unsure of the speed limit on one of the hill roads. Also don't trust Google with directions, use satellite view and street view to check.

What time did people end up getting to lofty? If i didn't have to work i would have waited around for sure.

^^^It was still a Skyline though.

I had to leave from Hallet Cove (was random as driving through the back streets with drunks walking the street haha). I would've gone on further except I had to take my passengers home. Was still alright to see the cars tho.

Are you the guy I was talking to before we moved at Northpark?

and yes, I also saw the people walking the streets, I think they were getting a lil excited by all the cars. Plus that dude in the falcodore smoking it up as we all drove past :P . I had a silver 32 GTR behind me through those streets, fck it sounded awesome when he booted it and I was in front of it lol.

I was leading when we got to the lander rd->candy rd mix up. So i had to decide to go left or right.

Here is where i went.<-click for map

I chose right to goto chandlers via kenihans.(I should have went left and made a U turn to get to candy.)

Got to point-C(refer to the above map^) an was flashed by the car behind me to turn around.

Turned around, got to point-D witch Kahli and another car was parked.

They proceeded to turn around an go back to the south rd.

So im thinking.. Theres no point going back that way, i'll go wait where everyone should be going once they check a map book or something..

Waited at candy/chandlers stop sign for a bit then at point-G turned car off, after awhile put lofty+each turn&my home into the gps. It said i'd be home at 12:35, so got going to lofty since i had to work sunday.

The black bodykited r34 or r33? that left foodland early got to lofty at the same time as me 11:50. I told them what happened and i had to go home.

Overall the cruise was good(and enlightening)! And featured a road that i've always wanted to see on a cruise. Unsure of the speed limit on one of the hill roads. Also don't trust Google with directions, use satellite view and street view to check.

What time did people end up getting to lofty? If i didn't have to work i would have waited around for sure.

Yep I got lost :P but anyway was good all the same. Would love to go out with the same group again, it was a good night.

Are you talking about the satin black one? if so it was an R34.

Are you the guy I was talking to before we moved at Northpark?

and yes, I also saw the people walking the streets, I think they were getting a lil excited by all the cars. Plus that dude in the falcodore smoking it up as we all drove past :P . I had a silver 32 GTR behind me through those streets, fck it sounded awesome when he booted it and I was in front of it lol.

Silver GTR?????? Didnt see that one. You sure your not talking about Chris's GTST? After market bonnet with Drift teks??

Yep I got lost :P but anyway was good all the same. Would love to go out with the same group again, it was a good night.

Are you talking about the satin black one? if so it was an R34.

Yeah thats Toms R34. I enjoyed the night except for my mistake. usually i go through the cruises but didnt get the chance this time.

Thanks anyways for the advise Jarred.

Would Def like to go for a cruise with everyone again sometime soon (:

xox Kahli xox

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...