Jump to content
SAU Community

R32 Gtr For Sale, Needs Afew Parts To Be Completed

den001
 Share

Recommended Posts

den001 Proficient

den001

Posted
Posted (edited)

Hi,

i have for sale my r32 gtr, black, 90 model

the car was bought few months back to be completed and then driven, since i am finishing my s15 off so i want to moove this on....

about the car

rust free

interior is in good condition, with only the gear surround missing, its pretty much complete, could do with a good clean but other wise in good condition for its age...

all the running gear in the car is frm a r33 gtr which has been fully built, the engine had done 7000kms

engine consists of

venolia pistons

argo rods

stud kit

tomei sump baffel

grubscrewed crank

brand new jun oil pump put on last week

head studs

head porting

metal head gasket

tomie type 2 cams

tomei valve springs

greddy plenum

garrett 400hp turbos each

aftermarket intercooler

tial blowoff valve

custom cooler piping

this setup was run in properly with a stock fuel system controlled my a motec which is not for sale with the car....

the parts needed top complete the car are

front guards

front blinkers

headlights

bar

bar rio

front driveshafts

tailshaft

radiator

the car was in a ver small hit at the front drivers side which done f**K all damage which was repaired by me... noting structural was affected in any way.... just where the headlight bolts to the rad support so barley any damage...

feel free to ring me for more info or send me a pm..

aftfer $$$ 15 000 negotiable

pics will be up by the weekend

sydney

cheers

denis

Edited by den001
Link to comment
Share on other sites
RBLUV Veteran

RBLUV

Posted
Posted
Can i see some pictures bro, sounds like it needs $$$$ to get it on the road. Will you take $7000 CASH. Ill give you $7500 CASH if you throw in the motec.

Cheers bro

oh by the way whats your number bro was going to call you.

Let me know what you think asap. money is in account now.

LOL is this guy serious

Link to comment
Share on other sites
ash-s13 Proficient

ash-s13

Posted
Posted
Can i see some pictures bro, sounds like it needs $$$$ to get it on the road. Will you take $7000 CASH. Ill give you $7500 CASH if you throw in the motec.

Cheers bro

oh by the way whats your number bro was going to call you.

Let me know what you think asap. money is in account now.

Lol i love it when people offer cash, what else are they going to pay in? Jellybeans?

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Big Brake Kit for ECR33

      By Kinkstaah · Posted

      TBH it's almost always due to inaccurate/misinterpreted use case, but this is not just brakes, it's everything. Dose's above post would be unacceptably shit, in my experience. When I say "track day performance" I mean 30 minutes of continuous hot lap braking with no cooldowns, no fade, no letting up. Your use case is paramount when selecting... well... anything.
    • Dose Pipe Sutututu
      Big Brake Kit for ECR33

      By Dose Pipe Sutututu · Posted

      Really comes down to user requirements, I have found my 324mm 350Z Brembo front set up more than sufficient for track use, especially for Wakefield Park with good brake pads. At Sydney Motorsport Park the GP Circuit can be a bit taxing on the braking system, I find by the 3rd hot lap there's rapid degradation in braking performance but at that point non semi slick tyres are about to give up anyway. And yes, the brakes are effective, slowing me down from 230km/h+ each time going into turn 1. Street use, it's more than enough for street activities. Most of the time people complain their brakes aren't sufficient, it's due to incorrect bleeding, poor choice of friction material, or faulty master cylinders.
    • Kinkstaah
      Big Brake Kit for ECR33

      By Kinkstaah · Posted

      I'm about to sell my Attakd kit actually, so if you want a budget 2nd hand kit they definitely do work, though make sure you update your BMC when/if you do. Just keep in mind that buying pads (for any aftermarket kit) can be a bit more complicated when you have an aftermarket caliper. Not all brands make pads in the shapes and sizes you may want, no matter what you end up with.
    • deuceforty2
      Wiring loom difference between A31 A/T RB20DET and R32 M/T RB20DET?

      By deuceforty2 · Posted

      Hey guys, I had an R32 M/T RB20DET in my S13 quite a while ago, however I have replaced the chassis harness on the S13 and picked up a new motor (A31 A/T RB20DET according to the ECU) and I am having a hell of a time trying to figure out the dash wiring (specifically the black/pink wire for the fuel pump).  It seems this A31 loom is quite different at the dash connector and there is not even a black/pink wire anywhere on the engine loom (on one of the 5 dash plugs that are there), or on the ECU for that matter.  Every pinout I have seen is totally different from the actual wires on my ECU and i'm at a loss on how to wire this thing into my S13....     Any ideas?   In summary : A31 A/T engine loom/ecu pinouts are different than any pinouts i have seen online (specifically around pin 18 Fuel Pump Relay) 
    • robbo_rb180
      Big Brake Kit for ECR33

      By robbo_rb180 · Posted

      What are you doing with the car? Drags, sprints, racing? A decent upgrade of dba 4000 rotors, good quality pads (endless, project mu, intima are all I have used), quality fluid and braided lines. All have held up to multiple big track days and street duties. No need for big fancy kits as some also require significant energy to come upto operating temp. Look at 350z caliper and rotor upgrade too.  @Dose Pipe Sutututu comment on them and did a good write up.
×
×
  • Create New...