Jump to content
SAU Community

Recommended Posts

Ok guys and girls its time to play " whats that noise?! " :)

K, when my GTS hits 2500rpm i get a really horrible noise coming from the exhaust which lasts to about 3000rpm.

Its like a vibrating note and sounds like shit.

Just wondering if its my Catalytic Converter, Muffler, Natural resonance or me???

Link to comment
https://www.sau.com.au/forums/topic/26751-exhaust-note-noise/
Share on other sites

assuming you have a stock exhaust, One with the twin head on it???

Have a look down the righthand side and you should see a flap over the hole, blocking it..

Like this... ex2.jpg

I believe the cable you can see in the next photo opens the hole when the pressure builds up or the car reaches a certain rpm!! This could be the cause of your noise! I find mine gets louder around the same time!

There is a cable on the upper right hand side that opens this flap!ex1.jpg

Just a thought!!!!

I know what you mean, its like a flapping, cracking noise from about 2500-3000, i think its a N/A thing, i got a barrel muffler put on and it just mad it louder sounds kinda cool like you got some funky mods or something, after a while when the engine heats up after 10mins or so it seems to die down a little bit. I can never work out what the noise is, i heard the cams do it aswell.........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...