Jump to content
SAU Community

Recommended Posts

After having a look at the various threads on people replacing their OEM swaybars with thicker whiteline one's and the overwhelming positive response they receive I thought it wouldn't be a bad idea to do the same with my NA R34.

I'm not sure if it's just my car, but it appears that the NA R34 coupes did not come with a rear swaybar as standard!!!

So my question is, if this is the case, has any other n/a r34 owners fitted rear swaybars to their cars?

If so what are the parts required (other than the swaybar duh), any modifications required to fit and approx cost?

Also what diameter swaybar people went with and the part # would be an excellent help to me :D

Thanks in advance to those who respond...

Resh

Oh and before anyone says "do a search"... I have and can't find any info on NA R34 swaybars. After learning of differences in suspension set ups between the n/a and turbo's I thought I'd ask here before dropping a couple of hundred one something that doesn't fit.

Edited by resh
Link to comment
https://www.sau.com.au/forums/topic/267635-na-r34-rear-swaybar/
Share on other sites

i would recommend doing both front and rear.

fronts go for a thick 24mm one (adjustable or fixed doesnt matter), usually the largest fixed one you can get.

rears go for something around the same size maybe 22mm but definitely an adjustable for the rear.

the swaybar settings will be dependent on your coilover setup.

normally you will be experiencing some understeer or oversteer.

harden up the rear swaybars to induce oversteer

soften up the rear swaybars to induce understeer

that's pretty much it in a nutshell, the setup is of course a little more dynamic than that and highly dependent on tyre grip!!

swaybars will ultimately reduce body roll when doing high speed turns. the weight is distributed to the inside wheels and you therefore put more tyre grip on the road.

hope that helps

How much more harsh is the ride in an R34 after fitting both front & rear H/D Sway Bars ? (whiteline)

I don't 'think' that sway bars make the ride harsher, rather just stabilise the load between the two sides of the vehicle.

I can't really comment too much on the before and after with sway bars as I also had 30mm lowered king springs fitted at the same time as my whiteline bars, but I can definitely say that it made a difference to the body roll.

The combination of spring/shocks and tyres/tyre pressure used would make a lot more difference to comfort.

I am in no way a suspension expert but that is how I understand it.

Ah Nathan you've had some fitted?

I'm aware you have a sedan but do you know what was required in order to fit the swaybars?

Did you just use the same part numbers at the turbo and it was more or less plug and play or did you have to add anything else that the NA was missing?

To be honest, I'm really not sure... I got a quote from Fulcrum for springs sway bars and fitting + alignment and they ordered the parts. They may be the same? Sydneykid will probably be able to answer that question for you. Or give Whiteline a call.

GTR parts tend to have different mounting points. I believe another member on this forum has found out the hard way after purchasing parts for his na r34 only to find that he requires GTR parts (as the GT-V's have the same 4wd setup). Unsure about r33's but if the r34 is anything to go off I would be pretty certain they are not compatible.

Also for everyone else who is interested I've shot off a quick email to whiteline in regards to the NA R34 compatibility and what's additional components are required (if any).

I'll post up their response once I've received it.

I'll try dig up my invoice from Fulcrum to see what part numbers are on it. If I recall there was mention of GTR on a couple of parts, I just thought maybe its just the way they entered the inventory on their system, perhaps a part suitable for most models... but maybe it is in fact different.

I'll see what I can find later tonight.

It's amazing how many companies who are supposed to know these things will term interchangeably use any skyline variant. For example the place i took my r34 to get coilpacks and a general service done printed R34 GTS on the invoice. Pretty sure there is no such thing as an R34 GTS!

If you can just get the part numbers later on Nath I'll cross reference the whiteline website to see if they are indeed parts interchangeable with the GTR.

Bring it up in suspension. I can't seem to find it anywhere! which is strange cause I keep all my car stuff in a folder...that I try not to look at lol I wouldn't have thrown it though as it had all the alignment results etc.. so if it comes up somewhere I'll post up.

We just put the Whiteline bars on my 32. We just took the rear back off and put the standard one back on.

Reason being my lap times were no better in some case's worse.

The bars we got have 2 setting's (I dont know if they are soft/med or med/hard) we tried them on the far end setting, no good, moved them both to the inside setting, was a little better but still heaps of exit oversteer. The front feels good but the rear doesnt. We only have basic setup, no coilovers, tyres that are getting old.

I read that its better to have a stiffer front and a softer rear so we will try that and see how it goes. Problem is we just dont have the money to go testing so it will be race day before I know if its good or bad. Which is NOT good.

Visit My Website

Edited by johnGTS-t

Wow - that sure is news to me... I thought all "modern" cars regardless of brand etc.

Reason being my '83 Bluebird (not a TRX) has a stock rear sway bar as well has the R31 skylines out there....

My R34 n/a (non- gt-v) sedan has them stock - I imagine the R34 coupes will have them stock due to being more "sportier" so to speak.

I just want to clarify are you refering to the rear strut brace (this is the brace you see in the boot and rarely comes with with almost any car) as opposed to the rear swaybars (which are "under" the car)?

After having a look at the various threads on people replacing their OEM swaybars with thicker whiteline one's and the overwhelming positive response they receive I thought it wouldn't be a bad idea to do the same with my NA R34.

I'm not sure if it's just my car, but it appears that the NA R34 coupes did not come with a rear swaybar as standard!!!

So my question is, if this is the case, has any other n/a r34 owners fitted rear swaybars to their cars?

If so what are the parts required (other than the swaybar duh), any modifications required to fit and approx cost?

Also what diameter swaybar people went with and the part # would be an excellent help to me :banana:

Thanks in advance to those who respond...

Resh

Oh and before anyone says "do a search"... I have and can't find any info on NA R34 swaybars. After learning of differences in suspension set ups between the n/a and turbo's I thought I'd ask here before dropping a couple of hundred one something that doesn't fit.

ah, good point Mark but surely Resh knows where he should be looking.

I've had the adjustable Selby front and rear swaybars and whiteline pineapples in my car for over 12 months now (from memory) they joined the Aus-spec Tein SS's. I installed the rear bar and pineapples myself but had to take the front swaybar to a shop to put on. I couldn't believe how much the swaybars improved steering feel and stability but they also increased ride harshness. the front bar is on the softest setting and the rear bar is on medium (again from memory). the teins are also on their softest setting.

i really can say, 'the car handles'. the amount of corner speed i can maintain is awesome and it always feels planted giving remarkable feedback.

i remember a cruise i was on towards the end of last year up north of brisbane going through some good twisties to get to the final meeting spot I had a GT-t behind me which couldn't keep up although I'm unsure of the GT-t's level of mods and drivers experience.

also as a reminder my car is a GT-V.

Mark I can understand how absurd it sounds that an R34 of all cars would not have it at standard but I assure you mine does not have one (and yes, I'm not confusing this with a strut brace). At first I thought that the owner in Japan must have removed it but after hours of searching this forum I found one or two others who have also realised they do not have one.

Of course there is that possibility that the Japanese owners of all of our cars were deluded and thought it would be a clever idea to remove the sway bar, but if they were that way inclined they wouldn't be driving skyline's in the first place!

For anyone who is keeping an eye on this thread I still haven't received a response from whiteline or another suspension/handling mob I've emailed but I'm sure the coming of the working week will bear some fruitful responses.

ah, good point Mark but surely Resh knows where he should be looking.

I've had the adjustable Selby front and rear swaybars and whiteline pineapples in my car for over 12 months now (from memory) they joined the Aus-spec Tein SS's. I installed the rear bar and pineapples myself but had to take the front swaybar to a shop to put on. I couldn't believe how much the swaybars improved steering feel and stability but they also increased ride harshness. the front bar is on the softest setting and the rear bar is on medium (again from memory). the teins are also on their softest setting.

More info regarding the ride harshness please Reggi :P Been thinking about fitting a set.

You can PM me if you want. Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...