Jump to content
SAU Community

Recommended Posts

Hi Everyone,

I was wondering if you could help me out please.

Recently I transferred money (22/04/2009) to Jess R33 for a PFC and HC post link is:

http://www.skylinesaustralia.com/forums/Po...55#entry4564955

After many PMs back and forth, with the last being Friday evening (24/04/2009) she said that she would post it Saturday.....

Since that PM I haven't heard from her despite sending her several PMs as well as posting twice on the thread.

I am worried that I have lost my money....and not really sure what to do

All I know, besides her bank details, which I won’t put on this thread are:

Name: Jessica

Lives in Rockhampton

Drives a maroon R33

Also selling an Apexi AVCR on a different thread....

Does anyone on this forum or who lives in Rockhampton know her? Can anyone offer any suggestions or help me please?

I really do hope that this is just a misunderstanding and a PM appears tomorrow (or better the PFC arrives) but I am losing hope.....

Thanks,

Peter

Thanks for the support and advice guys. Apologies for the link, this one should work....

http://www.skylinesaustralia.com/forums/Po...65#entry4566665

6TR, yeah I'll give it another seven days then contact the police....thanks for the offer axe_s - unfortunately I don't know her address...

Stll hoping for a PM or parcel from her....

Forever optimistic!

Pete

Just a FYI....

Hi adrian_r34 or should I say Jess R33,

It’s quite amusing how similar the both of you are:

adrian_r34 joined 24/04/2009

Jess R33 joined 20/04/2009

Jess R33 has an Apexi Power FC with HC to sell….from her Series 1 R33 which was recently “EPA’d”

http://www.skylinesaustralia.com/forums/Po...96#entry4545796

and so do you from your recently “upgraded” Series 1 R33 to a 34gtt

http://www.skylinesaustralia.com/forums/Pa...17#entry4553917

Jess R33 was also speaking of selling her standard r33 gtst series 1 driver’s seat in the same post

http://www.skylinesaustralia.com/forums/Po...96#entry4545796

and you….well…. you were quite interested in seats too….

http://www.skylinesaustralia.com/forums/Se...52#entry4554152

BUT the part that seals the deal for me is that the two of you have the same IP address…..

So….I think you need to have a little think, speak to your housemate (who you posted also has a R33)…..and let me know what you want to do…via post or PM…

What I would like is my $1200 back ASAP.

I will be contacting the police as well as DOCEP (Department of Consumer Protection) if you don’t get back to me.

Peter

I live in Rockhampton Mate. If you get in contact with her, be sure to get an address. Tell her not to bother posting and I will go pick it up for you.

Good luck anyway! There are a few burgundy R33s in town, but none I know are owned by a Jess that I know of.

Hey Guys,

Just gunna wade into this issue here..

FYI..

If you provide the bank account details to the police they will subsequently issue the bank with a legal request order for the owners personal information and either pop in to have a chat or give the owner a call.

They usually do this fairly quickly as it doesnt take long to request the info then make a phone call.

This is my housemates profile and he and I both work in banking.

For what its worth between the IP information and the bank account details tracking them down would be very simple.

Hopefully they are reading this thread and will pull there head out there bums.. hopefully there is a legitimate reason behind the delay.. which does happen.

Good luck with the search.

Contact me if you want any banking specific direction to deal with the money part of it. Your institution may be able to put a fraud request/claim through to the other bank.

Cheers,

T

Hey Guys,

Thanks for the support and advice - I'm having it looked into at the moment - so I'll let you know how it goes when it's resolved.

Cheers,

Peter

  • 1 month later...

This smells fishy to me..

If you do get to the bottom of this stuff, and it isnt a misunderstanding,

I think that the mods should ban this user/users, I know a few people in Rocky, I will be informing them of this scammer..



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...