Jump to content
SAU Community

does APEXi make Power FC for RB25DE?

mmmskyline

By mmmskyline,
in Engines & Forced Induction

 Share

Recommended Posts

mmmskyline Apprentice

mmmskyline

Posted
Posted

hi all, i'm contemplating on a turbo conversion on my r32 gts25, to date the engine mods on it are, tomei cams, 6:2:1 aftermarket extractors, 2 1/4 inch exhaust all the way no CAT, i'm thinking if i turbo the car i would like to use Power FC, but i'm told that Power FC only made ECU for specific engines, eg. RB25DE or RB25DET

I will probably be using a r34 gtt turbo, and manifold or maybe custom made manifold, how much boost can these turbos handle? I'm wanting around 1 bar, would i need to get the turbo modifed for steel compressor wheel for this boost level? if so this would in turn tend to lag a bit, this brings me to my next point of compression ratio and forged pistons....

I also have a few questions about the compression of RB25DE, they are 10:1 from factory, I'm thinking of keeping it the same compression is this ok? if i were to use good aftermarket forged pistons which are made to suit 10:1 would that make it much better for the engine, I also noticed that the factory compression ratio of a RB25DET is 9:1, is there 'that' much of a great difference in this? 10:1 and 9:1 is only 1 off.

any advice would be great, thnx in advance

Link to comment
https://www.sau.com.au/forums/topic/26807-does-apexi-make-power-fc-for-rb25de/
Share on other sites
skyla Community Regular

skyla

Posted
Posted
Originally posted by mmmskyline

I also have a few questions about the compression of RB25DE, they are 10:1 from factory, I'm thinking of keeping it the same compression is this ok? if i were to use good aftermarket forged pistons which are made to suit 10:1 would that make it much better for the engine, I also noticed that the factory compression ratio of a RB25DET is 9:1, is there 'that' much of a great difference in this? 10:1 and 9:1 is only 1 off.

you can keep the compression ratio 10:1, but you can only run relativly low levels of boost, I might be wrong, but I think it was about 8psi tops, any more boost and you start running into problems.

Nismodified Proficient

Nismodified

Posted
Posted

i think the stock CR for a turbo is 9.5:1, stock is 10:1, as said by skyla.

and yes, it is a fairly big difference, responsiveness is affected. Think of a turbo car in its lag range, thats what it would be like.

SOrry to go off topic, but can you give us any information about your tomei cams likes cost, dyno sheets, the impressive it made on you etc..

geordie Proficient

geordie

Posted
Posted

yeah im keen to hear what sort of power gains you have made out of those cams. You got same car as me lol, yours 4dr or coupe, mines coupe, i plan on doing a few n/a mods, get the power up a bit. So yeah same q's as nismodified, cost, power etc. Cheers

mmmskyline Apprentice

mmmskyline

Posted
  • Author
Posted

most of the performance mods were done by the previous owner of the car, who used to be in SDU also, so i think u'll have to ask him, he's kennydead on SDU forums

i think he told me he scored those tomei cams for free, coz he has a mate in japan who works around tracks or sumthing, and when the japanese go race or drift the cars, and sumthing even remotely 'out of tune' they'll throw sum of the near new parts away, these tomeis had only been used for a few laps so i'm told, and they threw it out, so his mate asked him if he wanted it, suits the RB25DE lol,

dyno, i think it made 110rwkw last time dynoed, not sure if that was with all the mods currently on it, but yeah, very smooth driving at the moment.

he's also currently doing a project car, r32 gts25 also , turbo'd it with garret t04E ( i think), steel compressor wheel, running standard 10:1 CR, very responsive, very quick, he says with a good tuner the CR can be kepts high

mmmskyline Apprentice

mmmskyline

Posted
  • Author
Posted
Originally posted by geordie

yeah im keen to hear what sort of power gains you have made out of those cams. You got same car as me lol, yours 4dr or coupe, mines coupe, i plan on doing a few n/a mods, get the power up a bit. So yeah same q's as nismodified, cost, power etc. Cheers

me coupe as well, got full GTR body kit with the GTR wing as well, gunmetal color :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Hi everyone.

      By Duncan · Posted

      haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • Duncan
      R34 Skyline climate control unit transistor

      By Duncan · Posted

      some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • Duncan
      WGNC34 - floor mats

      By Duncan · Posted

      It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • DominusUniversi
      R32 Skyline Interior Door Light Issue

      By DominusUniversi · Posted

      I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...