Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

i used to own a towing business you will want too make sure you have the right insurence once to put a car on the trailer ..ie when i backed my truck up to a car and put the cable to whinch it up i was covered by what was called hook insurence .

so if the cable broke the car owner was covered . once all 4 wheels are the tray of the truck it was called load insurence both come under a seprate policey and 2 lot's of premuim's .

you may want to check this out b4 offering the service . also seening how your effictly towing a customers car you may need a toweys lincence .

this is the main reason workshops find it cheaper just to ring a tow truck . i would not want a car of mine on your trailer not knowing what is covered and by who if you prang or the car falls off on the way to the workshop .

not trying to put you guys off its hard to make a buck in these days and times and good luck with the workshop just making you aware of what you might be up for .

cheers dean

it costs me $110 to hire for 24 hours from any servo ive been to plus a $50 deposit which i get back.

id have a flat rate, then charge after a few km's if its say more then 30-50km that needs to be driven (1 way)

that way it should cover the trailer and the whatever the tow car's general wear and tear while towing.

i'd also be buying insurence that'll cover the workshop while towing incase something happens to either car.

who wants to play hang man

Kietz, I editted your 1st post for good reason.....keep slagging businesses and you are out of here permanently!!

You've been going good for awhile now (I even reduced your warning level) don't blow it now mate.

it costs me $110 to hire for 24 hours from any servo ive been to plus a $50 deposit which i get back.

Which part of town you from?

If South, Caltex on Cross Rd. (261 Cross Road CUMBERLAND PARK SA 5041) charged me $85 last time i hired one for 24hrs which was a couple months ago now...

from port noarlunga mate.

ive used at least 3 or 4 different places , shell, mobil cant remember the others but each time its been $107 for 24hours plus a $50 deposit.

ive also used a shell up north near modbury and it was the same price.

maybe caltex is the way to go next time i take the track car out to lala.

also keitz, grow up mate.

Which part of town you from?

If South, Caltex on Cross Rd. (261 Cross Road CUMBERLAND PARK SA 5041) charged me $85 last time i hired one for 24hrs which was a couple months ago now...

from port noarlunga mate.

ive used at least 3 or 4 different places , shell, mobil cant remember the others but each time its been $107 for 24hours plus a $50 deposit.

ive also used a shell up north near modbury and it was the same price.

maybe caltex is the way to go next time i take the track car out to lala.

also keitz, grow up mate.

My work (Rob's Fuels) do a car trailer for $60 + $50 deposit for 24 hours.. Didn't realise how cheap we actually were on that.

all insurance issues are being dealt with. as for general insurance on workshop and workmanship/public liability thats all done and up to scratch. Other than that hoist got up and running today and also got all the tools and welder in today, so we are pretty much ready to to buisiness as of tomorrow!

hope o hear from you soon

Good luck with the new shop Ben and Simon!

Im sure it will all go well especially with the high level of quality you have always put into my car in the past Simon

When i get my license back my car will definitely be down there for some things that need doing

:D Ceff man

EDIT: Was going to say don't be afraid to go down to the workshop/give them a call and have a chat about any ideas you might have :P

Edited by Ceffy_SA

Hey guys not sure if i put in address anywhere but on unit 3/26 stanbel rd salisbury plain. there is a workshop out the front called glenrothes mechanical. there is a driveway that runs down the side of that and we are second shed on the right

now open for business!

ok Ben and Simon. Thanks for ignoring my post above regarding becoming an SAU site sponsor, but if you haven't responded to me within 24 hours this post is gone and you get an official warning.

It is not fair for you to plug your business on here for free, when other businesses do the right thing and pay sponsorship fees.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
×
×
  • Create New...