Jump to content
SAU Community

Recommended Posts

Guest gtr_monster

USED BC Adjustable Coilovers to suit NISSAN SKYLINE GTST R33-34 height and damper ajustment.

asking $800 ono

located in newcastle nsw

BC - BR - Sports Adjustable Coilovers are a advanced well produced alternative to the many Brands in our market today sharing features much more advanced than the competion.The BR range is BC's Flagship Model range offering the ultimate in Performance and Reliability in our demanding Road conditions.

The BR Range Features a very large 53mm Piston Insert design unlike most of the alternatives being only 44mm. This larger design Piston contains more Lubricating oil slowing down the oil Temp Increase in Demanding road contions where the Piston is working very hard.All BC BR coilovers Have Visible Large Bump Stops and Piston Dust Boots

BC BR has 32 points of damper adjustments means you can fine-tune your vehicle for whatever the circuit calls for from Soft for street driving to Hard for track use. It can also be disassembled and rebuilt as well to meet with whatever the circumstances.Easy Damper adjustment with Twist dials from the top of the Suspension.

Cast Iron Lower Powder Coated mounts With Strengtheners are Used on All Mc Pherson Suspension Designs unlike Most of the Cheaper Alternatives using Aluminium which is a lot Weaker and prone to damage from Demanding driving,OE manufactures also use Cast iron as do BC for Road saftey Reasons.ABS and oil Line brackets are manufactured onto the BC lower mounts making driving a lot safer and Accident free plus also Hassle free installation.

"A" Frame Design Suspension like the Honda has Cut-out Design holes in the Mounts for ease of cleaning the insert Threads of Dirt and to View Safe and Precise Height Adjustments.

Coil Springs are High-Rigidity SA9254 Sports Springs that come Pre Loaded on Fully Assembled Coilovers.

Newly Designed Gold Lock Rings makes Adjustment a lot Easier over the common Aluminium which tends to be Chewed up after a couple of Adjustments.

L Shaped Plastic Spring Seats are Also used to prevent Friction between the Coil Spring and Lock rings Avoiding Coilbind Noise common when using the Cheaper Rubber spring seats in Cheaper Brands

Height adjustments to lower the vehicle up to 110mm lower than standard ride height( Depending on Application ) for better center of gravity or can be used and set at the OEM ride height.

BC BR uses Large Heavy Duty Pillowball top hats means camber adjustments can be adjusted at ease and is available for all car models that use Mc Pherson Style suspension,Where not applicable the standard top hats are used as in most European cars or comes with Solid Top plates and Hard Bushing. All kits come with a Tool bag which includes The Ring spanners For Height Adjustment All suspension units come with a 12 month Limited Warranty for replacement parts found to be defective, From Performance Guru within normal use and not road abuse , there after all parts can be sourced.Warranty is void if used for Track Racing. All BC BR Sports Adjustable Coilover units are TUV ISO 9001 : 2000 Approved ** LARGE 53mm Mono Tube Piston Design ** CAST Iron Lower Mounts With Strengtheners ** ABS and Oil line brackets Mounted in O.E Locations ** 32 points of Damper Adjustment ** Large Heavy Duty Pillowball Bearings ** Newly Designed Lock Rings ** Rebuildable

pics up tomorrow

Link to comment
https://www.sau.com.au/forums/topic/268753-r33-gtst-bc-coilovers/
Share on other sites

From the pics you showed me, i told you they look like BC to me. But they are not the BR series. They look to be the older BC type, with red collars.

The BR series have gold collars. like this

br-coilover-overview.jpg

From the pics you showed me, i told you they look like BC to me. But they are not the BR series. They look to be the older BC type, with red collars.

The BR series have gold collars. like this

So the 1's that GTR MONSTER is selling are either VS, VA, or VH Series?

Anyway GTR MONSTER put sum pics up mate or PM me sum, really keen!

my guess is they are VH

have a look here. http://www.bcracing-na.com/products/nissan.html

the last number on the spring is spring rate in kg. 12/6 for r33

i dont mean to get involved in this guy's sale thread, but i hate to see someone buy something under false pretense.

i was going to buy these when i thought they were pedders, till i saw the pics. hence my comments.

this is the type of thing you expect on Boostcruising, not SAU >_<

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...