Jump to content
SAU Community

Recommended Posts

hmm if what sort of money would i need to fork out for a nice 350gt, no accident history, grade 4+ inside and out, with suede/leather int with the nav (premium pack)........spoiler, reverse camera, sunroof would be a plus but not really needed (don't need the extra cost) - id like total cost if possible? thanks.....still looking btw :D

Edited by ezy03
  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

i just bought a very nice one for a customer pearl white , 18' nismo lmgt4s and nismo exhaust , 60,000km non premium for 1.05 million fob.

budget somewhere around there , bit more for the premium crap . the total cost of that is about 22-23k all up including tyres and immobiliser

Edited by autoworx
i just bought a very nice one for a customer pearl white , 18' nismo lmgt4s and nismo exhaust , 60,000km non premium for 1.05 million fob.

budget somewhere around there , bit more for the premium crap . the total cost of that is about 22-23k all up including tyres and immobiliser

Where did you find that one, it sounds mint for the price. I would have been all over it like BS on KRudd.

cant remember tv/navi but no leather/half leather . it was 12/03 but the customer was set on pearl white and it was very nice and clean

again budget extra for premium or later model

personally the full leather is hideous , the half leather is ok but not that great , the tv/navi more hassle than its worth to convert . give me one with a proper double din facia anyday and ill put my own decent system in it

i found a nice car not from tradecarview as ppl said its shitty and all, i used uss and some other auction sites that people have recommended. i found one for 1200000 FOB, there's no chance i can get that here complied and all ready to go and drive ( minus rego - i'm not including that cuz its a yearly expense on any car)..anyways theres no chance someone can do that all up for me for 21-22k? :)

Same here, looking to import one myself as can't find any on carsales that I like, Auto, White, Leather or Half Leather, etc.

From WA.

i saw one ..in nsw selling for 23k called the guy up and waited one hour for him at meeting spot to inspect it and he didnt show up or pick up when i called or txt msgd him .. just a jackass piece of.... like you would think he would atleast pick up say he cant make it...fn prick...the car is 2003 v35 350gt with 75000kms...im not sure if i can say anymore about it due to forum rules or privacy rules.

i did find a wonderful site though on the cost and it explains most of the importing process, i havent read it all cuz my mind like booooooffff! from uni, but i got this out of it wen i clicked cost...

Import Costs (in Australian Dollars)

Import Approval Application - 50 AUD

Examination + Steam Clean - 165 AUD

Duty - 10% (for passenger vehicles) x Customs Value (FOB price - not including Freight or Insurance)

GST (Goods and Services Tax) - 10% x VoTI (Customs Value + Duty + Freight and Insurance)

LCT (Luxury Car Tax) - for vehicles valued (GST inclusive) over $57,000 AUD.

RAW Compliance - Depends on Car

2.75% Stamp Duty for licensing vehicle (for light vehicles up to $20,000 value)

just wondering that ALL of the costs or is there maybe cost of customs clearance or is that added in the compliance and stuff - also blue slips etc are in there aswel? does that cover EVERYTHING? anything missing?

the link is - http://japan-used-car-exporting.info/import/ - look around in the tabs for the place i got that info.

Edited by ezy03

Here you go mate, I'll make it easy for you.

For a car based on 1.2m yen:

1. Importer fee = $1000 (give or take $100)

2. Car cost = 1,200,000 divided by exchange rate = $16500 (add another $1000 if FOB costs arent included)

3. Shipping and customs agent fees = $2000 to $2500

4. Tax = $3500

5. Compliance and RWC requirements = $2500

6. Registration $1000

Total = $26,500 to $28,000

If you want a car for about $22k, you should contact one of the importers on here (iron chef, autoworx, whoever) and pay their service fee. They will scour the auctions and find you one for a better price than you can get a dealer. It wont be hard if you are patient. But yes, first step is to sign up with an importer and pay their fee.

You'll be struggling, to be honest, even from a broker. I can give it a shot, but you'd have to really snag it cheap if you wanted something half decent. Don't hold out for a TV either - condition of the car should always be the most important deciding factor, rather than features.

what would be the FOB price if i do look at getting everything totaling max 21-22k? - if i know the FOB price ill just look around for some before i make any moves for a broker, but ill definitely need one....as you can tell I'm a very hard customer very picky....very compulsive that's why the million questions and endless reading of info....plus I'm a uni student and as we all know were suck ass at making some dough for a living and struggle to get a job so 22k is a lot for me, so thanks for grunting this out with me so far and for the replies its been alot of help. ill still be searching just need that FOB price if im totaling 22k :P :P

thanks again guys. just been awesome

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...