Jump to content
SAU Community

Recommended Posts

Lads,

Gonna grab a EBC this weekend. No idea what to buy to be honest. Happy to spend $500-700 bucks i guess but have no need for fancy f**kin screens and gizmos.

I hear the dual solenoid EBC are the way to go. Why is that exactly? What is the advantage technically speaking over a single solenoid? Or a boost tee for that matter.

Im not going to buy a Boost Tee thing as i hear they can spike fairly dramatically and i dont plan on replacing the turbo, thus ive disregarded the idea. Going to run 10psi as apparently its fairly safe. Ive heard i can run 12 max, its tempting, but im not game. Already told my wife ill do no mods to the car .... i managed to do the below on the sneak..

Mods:

R34 SMIC

3 INCH NISMO EXHAUST HIFLOW CAT

JJR SPLIT FRONT/DUMP PIPE

K&N HIGHFLOW PANEL

STOCK BOOST (although im running the high mode constantly..)

168 KW ATW so far.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/
Share on other sites

$700 on a boost controller is insane, there are cheaper options for sure

check out ebay and look for a 2nd hand unit if you want

just check their feedback etc. but for std turbo a single solenoid unit is fine

ive ran 12psi or 0.85 for about 4 years now on the same std turbo

210,000km and still going fine. my recommendation if you have $ to burn

apexi powerfc, hand controller and powerfc boost control kit

unbeatable

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/#findComment-4582987
Share on other sites

$700 on a boost controller is insane, there are cheaper options for sure

check out ebay and look for a 2nd hand unit if you want

just check their feedback etc. but for std turbo a single solenoid unit is fine

ive ran 12psi or 0.85 for about 4 years now on the same std turbo

210,000km and still going fine. my recommendation if you have $ to burn

apexi powerfc, hand controller and powerfc boost control kit

unbeatable

You have had to PowerFC running things including boost since the beginning. maybe thats why its lasted?

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/#findComment-4583019
Share on other sites

not sure

first off i did the boost hack (i made the howto doco)

then i did the hks EVC at 0.85 bar

then did the pfc boost kit at 0.85 bar

std turbo 210,000kms and still goes well

its been to drags, motorkhana, plenty of street abuse

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/#findComment-4583090
Share on other sites

mate get a turbotech one. it holds boost, but if you want to be in the safe place, go for the blitz sbc or the greddy profec spec b II, i was using iton the stock turbo and i compared it to my turbotech one, i relased it had a bit of lagg and spikking, the electronic one boost will come on earlier and hold better.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/#findComment-4583115
Share on other sites

not sure

first off i did the boost hack (i made the howto doco)

then i did the hks EVC at 0.85 bar

then did the pfc boost kit at 0.85 bar

std turbo 210,000kms and still goes well

its been to drags, motorkhana, plenty of street abuse

yeah i know and its a bloody good hack i must say. Certainly made a noticeable difference especially around town. Considering you have to be virtually full throttle passed 5k to even seen/feel the second stage, i rarely ever did. Simply concept too. I wired up a switch but ive left it on permanently.

perhaps i shouldnt worry to much about the car holding up then. Ive got 70k and its seen no abuse from me or previous owner in Japan. Serviced every 5k or less etc etc.

good to hear anyway.

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/#findComment-4583635
Share on other sites

get a turbotech manual boost controller of ebay, this would be the ONLY MBC id use. theres a big 80+page thread on here just search for it. + if your hiding mods from your wife i dont think your gonna go over 200kw & 12psi anyways, ive only ever heard problems with this MBC over 15psi, yet some people run close to 20psi, so you will defo be safe

this will do the job for under $40 http://cgi.ebay.com.au/Turbotech-manual-tu...93%3A1|294%3A50

Link to comment
https://www.sau.com.au/forums/topic/269081-r33-gts25t/#findComment-4584024
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...