Jump to content
SAU Community

Recommended Posts

They no longer do E-class licenses, the "Double or Nothing" rule has taken over. They give you a full license, but youllse a demerit point within 12 months you'll lose your license for double the original amount of time.

I'm not sure if you can do it on P plates because if you lost your licence while on Ps, you have to resit your practical test before getting your license back.

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4583780
Share on other sites

They no longer do E-class licenses, the "Double or Nothing" rule has taken over. They give you a full license, but youllse a demerit point within 12 months you'll lose your license for double the original amount of time.

I'm not sure if you can do it on P plates because if you lost your licence while on Ps, you have to resit your practical test before getting your license back.

i lost my license a few months ago (have 3 1/2 weeks before i can go for my L's again) on my P-plates, was on green P's aswell...You have to reapply for your L's, so sit the first test, the 30 questions one, then your driving examination, then the HPT then, you have your P's back.

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4583830
Share on other sites

They no longer do E-class licenses, the "Double or Nothing" rule has taken over. They give you a full license, but youllse a demerit point within 12 months you'll lose your license for double the original amount of time.

I'm not sure if you can do it on P plates because if you lost your licence while on Ps, you have to resit your practical test before getting your license back.

Correct.....

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4583992
Share on other sites

If you lose your license for 3 months, and gain any demerit points during that period(3 or 6 months typically depending on the offence. 3 months for general loss of licence, 6 months for reckless) then your suspension will double (so 6 to 12months etc).

Incorrect....

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4584071
Share on other sites

Damn, news to me though just checked and saw this 'good behaviour period' as outlined here

http://www.dpi.wa.gov.au/licensing/yourlicence/15639.asp

I'd rather lose my license for 3 months, then get all my points back so I won't have to stress for 9 months. Considering the lack of TEGS on the road, you'd just be unlucky to be nabbed for driving without a license.

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4584925
Share on other sites

I've been told pleading your case in person to the DPI can lead to e-plates. dont quote me on that though, was told about it a couple of years ago.

I just got a letter saying I can only get 3 more demerit points before losing my license, and it outlined the whole double or nothing thing as well... sigh.

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4595484
Share on other sites

i lost my license a few months ago (have 3 1/2 weeks before i can go for my L's again) on my P-plates, was on green P's aswell...You have to reapply for your L's, so sit the first test, the 30 questions one, then your driving examination, then the HPT then, you have your P's back.

dont have to do the hpt mate, i lost my license in oct and only got around to getting it back a month ago.

I passed the theory on friday and practical on a saturday but they dont process it until mondays, i thought i had to do the hpt, so i was driving round on monday shit scared of getting a 9month driving without a license suspension. But when i got to the dpi on monday arvo they said yeah all good go for it, I was like wtf and they told me you only ever have to do the hpt once.

Link to comment
https://www.sau.com.au/forums/topic/269092-e-class-license/#findComment-4601209
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...