Jump to content
SAU Community

Recommended Posts

hey guys, im thinking of stripping my aftermarket bits off my skyline to cut my losses. so if i get enough interest in most the gear then il go ahead with it :)

- Garrett GT34r bolt-on turbo kit for rb25det (comes with water and oil lines) travelled under 10000kms. this is a direct bolt on kit. GCG rated it at 550hp, and claimed it was good for 300rwkw. ---- $1500 (have receipt for $2750 from gcg)

- Apexi power fc + hand controller for rb25det (r33) ----- $1200

- Walbrow fuel pump --- $120

- HKS EVC 3/4 (all hoses etc included)--- $230

- z32 afm + Plus --- $200

- Deutchwerks 550cc injectors (rb25det neo) ---- $400

- Apexi pen turbo timer with wiring --- $100

- Apexi POD --- $50

- Blitz BOV with hot pipe and filter adaptor ---- $150

- BuddyClub coilovers (r33 gtst) ---- $1000

- r32 GTR seats, good condition ---- $450 the pair

- Skyline rear strut brace (r33) --- $100

theres more parts and ill put them up as i remember :D

pm me if interested

cheers

Link to comment
https://www.sau.com.au/forums/topic/269378-eoi-r3334-performance-parts/
Share on other sites

is the turbo a low mount? any shaft play? how much power was it making at what psi? when does it hit full boost? does this need a spacer plate?

injectors are top feed im assuming.

interested in turbo and injectors. also location?

Edited by john-e boi

turbo is a low mount and sits on the standard manifold (comes with the adaptor plate). i havent checked for any shaft play as its still on the car. but it neva chewed any oil or blew any smoke. it was also neva boosted past 10ish psi as my coils began to miss and i only had a heavy duty clutch. with uni and work i never got around to finishing it off unfortunately

like i said turbo and injectors are still on the car and i wont start taking thing off till i see genuine interest in most the things. however i got a few pics from a few months back when i was installing them. hope that is of any help.

my number is 0405929275, cant keep up with pm's, so just give me a call and ill send you some pics via mms etc :D

hey guys, im thinking of stripping my aftermarket bits off my skyline to cut my losses. so if i get enough interest in most the gear then il go ahead with it :D

- Garrett GT34r bolt-on turbo kit for rb25det (comes with water and oil lines) travelled under 10000kms. this is a direct bolt on kit. GCG rated it at 550hp, and claimed it was good for 300rwkw. ---- $1500 (have receipt for $2750 from gcg)

- Apexi power fc + hand controller for rb25det (r33) ----- $1200

- Walbrow fuel pump --- $120

- HKS EVC 3/4 (all hoses etc included)--- $230

- z32 afm + Plus --- $200

- Deutchwerks 550cc injectors (rb25det neo) ---- $400

- Apexi pen turbo timer with wiring --- $100

- Apexi POD --- $50

- Blitz BOV with hot pipe and filter adaptor ---- $150

- BuddyClub coilovers (r33 gtst) ---- $1000

- r32 GTR seats, good condition ---- $450 the pair

- Skyline rear strut brace (r33) --- $100

theres more parts and ill put them up as i remember :P

pm me if interested

cheers

Hi

im interested in the coilovers.how old are they? pm me plus location?

- Garrett GT34r bolt-on turbo kit for rb25det (comes with water and oil lines) travelled under 10000kms. this is a direct bolt on kit. GCG rated it at 550hp, and claimed it was good for 300rwkw. ---- $1500 (have receipt for $2750 from gcg)

- Apexi power fc + hand controller for rb25det (r33) ----- $1200

- Walbrow fuel pump --- $120

- HKS EVC 3/4 (all hoses etc included)--- $230

- z32 afm + Plus --- $200

- Apexi POD --- $50

- Blitz BOV with hot pipe and filter adaptor ---- $150

- BuddyClub coilovers (r33 gtst) ---- $1000

PM sent re above parts...

Cheers..

Alex

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As long as its NOT a HyperSHITtune, youll be fine.
    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
    • Wanted to follow up on this. Did you end up getting the M073? Still deciding on what to get between nismo m073-79 and plazaman.  
    • I was just watching these boys up in QLD AWD'ing their S13 too.  
×
×
  • Create New...