Jump to content
SAU Community

Recommended Posts

K ive got a coupe in need of some love and some parts

tailshaft

pair of good doors - no rust, working latches, locks and key. no glass or door cards needed. I know im asking alot but my doors are shit and a good pair will fix a few problems at once

alternatively, a passenger side latch assembly that works

boot lid striker, not the latch, the bit that screws onto the bootlid

headlight surrounds and grill in good nick

manual gear stick boot for centre console

roof light console thing

rear drivers side seatbelt in brown

an uncracked dash? lol

a complete stock engine, flywheel and gearbox (maybe)

more as i pull more apart and find more broken shit

im in brisbane but will pay for post for smaller stuff.

Link to comment
https://www.sau.com.au/forums/topic/269514-wtb-c210-bits-doors-trim-peices-ect/
Share on other sites

woah,,,,,

you gonna have a heap of fun trying to get all that!!!

if it was 4 door it may be easier, as ther is one at the dapto pick a part wreckers (near woolongong)

i was up there about 3 or 4 weeks ago, even had hotplates in the boot, all the chrome looked fine too

they are pretty pricey though

  • 2 weeks later...
  • 1 month later...

You have almost no chance of finding decent c210 coupe doors. You may have to weld new sections into what you have, and finish them with locks etc from a donor car.

Funnily enough, I just picked up a rusted out C210 sedan. Unfortunately its auto, its in Vic, and shipping big stuff like the L24 to QLD is going to be painfully expensive. r30s with L24 engines are pretty common (2 on ebay this week) and don't go for much money, you could probaby find something closer to home. Better yet, you could invest in a rusty 280zx or Nissan Patrol and try to grab a complete L28. Finally buying rings, bearings and a gasket kit and rebuilding the engine you already have isn't a bad idea either.

If you still need any little fiddly bits (locks, boot striker, roof console etc) that wont cost you a fortune in postage, let me know.

im considering ripping the whole back half of interior out for a roll cage. but im gunna have a good think and plan this weekend. might have a heap of spare bits for ya mate. oh and i found a boot striker thingy if you need it still??

how's the car going otherwise? done much yet??

Edited by Silent Shadow

nothing man havent had money / motovation still isnt in shed lol

probably going to rip out interior as well as its pretty much trashed

but yeah. still need the boot striker, wouldnt mind a roof console, a full wiper washer switch, passenger side door latch..

nothing man havent had money / motovation still isnt in shed lol

probably going to rip out interior as well as its pretty much trashed

but yeah. still need the boot striker, wouldnt mind a roof console, a full wiper washer switch, passenger side door latch..

that sucks man. wish i could motivate you a bit more but im out of ideas lol.

i got the striker. you can just have it. unfortunately the other bits you need i took from the car in the first place cause the same bits on my car were F'd. sorry man!

  • 4 weeks later...

so im slight;y more motivated, i put a battery in it to test what still works and the lights make shineyness and the wipers move, alough VERY slowly. yay some life from it!

um yeah. i kinda want an engine and shit so i can at least drive it form shed to shed whilst i work on it.

silent shadow: can you post me that stricker and any other little bits ive listed? ill swing you some coin.

to summarise, heres a list of shit i want

SHIT I WANT

all in decent condition

body

Pair of good coupe doors, or passenger latch and a set of locks and key

headlight surrounds and grille

boot lid striker

mechanical

Tailshaft

Complete running engine with manifolds, carby ect. or a stock z engine with the twin carbs

Flywheel, clutch fork, shifter, manual box

interior

working wiper/headlight stalk assembly!!!!!!!!!

centre console and manual shifter boot

roof console

rear drivers seatbelt (brown)

some other stuff that id buy but would rather spend cash on the above ^

okish dashboard

full set of clean seats to suit coupe

a pillar trims in brown

any brown coupe interior bits in decent condition

Edited by racsov500

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...