Jump to content
SAU Community

S1 Clear Front Indicators

QWK32

By QWK32,
in Four Door Family & Wagoneers

 Share

Recommended Posts

GoldZilla Grand Master

GoldZilla

Posted
Posted
hey guys, i was looking around on ebay and found these, clear front indicators for the S1 and thought some of you may be interested.

Link

Yep, that's Paul @ Performance Wise - he was (and maybe still is) a trader here on SAU, and that s1 in the shot is his own car. He's been offering these for quite a while, actually.

  • 2 weeks later...
BensDR30 Experienced

BensDR30

Posted
Posted

Got mine in the post today (I'll do the ebay feedback later this evening). A couple of tricks for young players apply;

- The provided socket doesn't match the S1 wiring, simply fitting the OEM socket solves that one.

- The locking tab slots in the bumper are different sizes top/bottom - a little trimming is required to make the replacements fit.

- Fitting some packing material to mimic OEM might be beneficial around the lens, I'm going to see how much crap gets caught up and take it form there.

Otherwise, for a Chinese special, they seem pretty good, the curvature is spot on and most importantly, they flash orange!

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Ha ha ha, so they stopped the bearings spinning on the one you want, but then decided the crank hub should slip instead 😛   Stick to RB, at least you can work on it yourself. And now it doesn't smell of vapour   Also I still believe there's a chance your new flap doesn't "pop", as even though the engine might breath hard, it has a direct path with no restriction to the inlet, which when on boost should pull a bit of suction for you. If you do get pressure in the catch can id be very intrigued. Time to put a boost gauge on it, and a session at the track, then solid cover your vent and do another session
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Oh nah, S55 doesn't eat bearings, just the crank hub slips lol.
    • Milkmun
      The Evolution Of "night Fury"

      By Milkmun · Posted

      When’s the tow ball on the 33 coming? 🙃
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I welcome any basic question that can help haha. Yes it has 2 unis but the driveshaft is a one piece and the unis are welded without a slip yoke at each end.   What's funny is anytime I've ever had wheel vibrations it's always been in the front so I automatically assume it will lead to steering wheel shake and not chassis vibration. With that being said, I never considered looking at my rear wheel balance... I have doubts though as this wasn't an issue before I pulled the motor and trans but is still very much worth a look. I'll do that tonight after work. Thanks. 
×
×
  • Create New...