Jump to content
SAU Community

Recommended Posts

i turned the car off for a good 10 mins, then started it again and got off down the highway...the light stayed off for about 5 mins, then came back on again...with the r33 system having electronic actuators, doesnt it set itself to a centralised position and stop doing anything when it detects a problem?

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4599465
Share on other sites

Do you have an after market steering wheel installed? If you do, then theres a chance that the after market boss kit isn't HICAS compilable that or the HICAS sensor in the boss kit isn't connected properly.

This happens in my car.

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4599530
Share on other sites

I do have an aftermarket wheel on, HKS boss kit. it hasn't done it to me before, and after pulling in at Mittagong for about half an hour, it didn't do it again all the way back to Canberra. I'll pull all the plugs out and make sure they're clean of dirt etc, might pull the wheel off too and do the same.

Thanks for the input tho :P

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4599854
Share on other sites

A lock bar is generally around $200 + install and then you would need to get a wheel alignment.

Plus you need to pull the Hicas bulb in the dash or it stays on permanently.

The other option is the Tomei Hicas lock kit which has shims and an electronic gizmo to fool the ECU into thinking Hicas is still functioning, currently around $185 + postage on Ebay.

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4600637
Share on other sites

I always thought the pressure was required to keep the rear rack centred, and hence the need for a hard lock if you disable it.

I removed all the crap from mine - lines etc and lost about 20 kg of highly expensive junk as well as creating extra ps fluid capacity. Was going to fit a shorter R33 pump but it's well down the list of things to do.

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4604294
Share on other sites

I was going to have all my hicas stuff removed when i had my engine out...but the guy "FORGOT" so instead he put in a lock off whatever it is. with a lockbar then unplugged the solinoid to stop warning lights...but forgot the speed sensor which made more lights come on....><

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4607177
Share on other sites

I was going to have all my hicas stuff removed when i had my engine out...but the guy "FORGOT" so instead he put in a lock off whatever it is. with a lockbar then unplugged the solinoid to stop warning lights...but forgot the speed sensor which made more lights come on....><

Please tell me this guy had nothing to do with your engine removal/fitting...

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4607560
Share on other sites

Please tell me this guy had nothing to do with your engine removal/fitting...

>< It's being checked over by someone who's work i trust currently so he will pick up on anything else that has been forgotten...but in the most part the only problem with the engine ive had was the accessory belt needed tightening and a few old wired snapped. But the car runs smooth as a untuned GTR does...

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4609717
Share on other sites

Troy, seeing as I sold you the car, I will clarify a few things to save you and a few other people some time.

For the record you have a HKB bosskit installed in the car fitted to a GKtech wheel, the bosskit inwhich is in your car is HICAS compatible. The problem you have found occuring is not infact related to steering wheel.

If you stick your head under the back end of the car you will notice that there is the KYB HICAS linkage system, carefully, and I repeat carefully remove all the plugs and give them a spray with contact cleaner or electrical contact cleaner, it is quite dirty under there I know, and 15+ years of driving im sure has clocked up alot of dirt,

The member who posted that the Hicas system throws a warning under movement of the rack ends is correct to an extent however it is highly unlikely that the rear end of the car would move enough to trip sensors, I should know I went over the car with a fine tooth comb before it went on the truck.

The light has come on with me driving only 3 times in the 2 and abit years I owned it, and I put it down to age, I can assure you nothing in the rear end is astray or in need or repair, however a safety check would be recommended for peiece of mind.

A more probable cause to the problem mate (having worked around many Hicas equipped cars over the years) Would be that a earth wire has come loose (which I suspect is the case) or Jax Quitfit f**ked it somehow when they did the balance on the tires.

I suggest jacking the rear end of the car up mate, and if you drop the 2 10mm bolts either side of the linkage it will swing down, there you will be faced with 2 21-23mm bolts holding the diff into the rear cradle, what I suggest checking is that the HICAS earth is still connected to the left bolt, if it isn't re-connect it, I dare say this is your problem!

Goodluck mate and keep me posted on the car, I do miss it alot!

Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4610984
Share on other sites

The member who posted that the Hicas system throws a warning under movement of the rack ends is correct to an extent however it is highly unlikely that the rear end of the car would move enough to trip sensors, I should know I went over the car with a fine tooth comb before it went on the truck.
I was only talking to John @ Trojan about this on Friday night.. One reason that was brought up is that if you have movement/play in your rear rackends. The Hicas throws warnings

It was only a noted suggestion as it was a coincidence we were just talking about it as my rear rackend wasn't in great shape (since replaced two days ago).

Edited by sfrizza
Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4611670
Share on other sites

Also it is worth noting that you should check the fluid and top up if necessary, even over-full if you wish, It sovled my problem first time it happened in the car!

From what i remember, the rear hicas resovouir needs to be topped up when the car is running as it drops a bit. If you top it up when it isnt on it could still drop below the minimum and trigger the warning light. Check every plug and as age was mentioned, check for snapped wires. It doesnt take much for years of little bits of road hitting a wire to one day just snap.

Hope its a quick fix for you once you find the problem :(

Edited by Helious
Link to comment
https://www.sau.com.au/forums/topic/270402-hicas-warning/#findComment-4611753
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...