Jump to content
SAU Community

Recommended Posts

Guys,

I'm being forced to buy a house so the OS Giken pistons I bought will never make into my engine. This was a special order and is the one of the only sets made. OS Giken as you all will know make some of the best pistons in Japan.

The kit comes complete with forged pistons, rings, clips, and heavy duty wrist pins and is brand new in the box.

I'm asking $old (which is less than I paid all up). The price I paid originally included the cost of a brand new stock piston from Nissan for them to reference and copy.

PM me if you need more detailed photos.

Only serious buyers please. I'll ship it anywhere in Australia.

(0419)

I've also got other parts which I will post up later. ie. Greddy plenum, Jun cams & adjustable wheels, Tomei valve springs, HKS head gasket etc...

Cheers,

Gerard

hey mate if i had the cash id take those pistons now but i spent to much on mine at the moment so gotta save some cash but i will b afta some cams, a head gasket and if u know who can get some for a good price some hks cam gears email me at [email protected] when u r gonna sell em thanks mate and good luck with the pistons wish i could get em :D

Due to the number of responses, here is a full list and revised numbers.

OS Giken Pistons Sold

Greddy inlet plenum + Greddy fuel rail (top feed) + adaptor Sold

Nissan Q45 90mm throttle body with matching short accelerator cable Sold

Jun Cams (custom 66(264) 9.0 lift, largest lift without headwork) Sold

Jun adjustable Cam wheels Sold

Tomei valve springs Sold

Jun 1.2mm Headgasket Sold

Nismo 300km/h speedo Sold (I can have it set to match the stock odo if required)

Nissan RB25DET Engine gasket repair kit Sold

Gasket kit comes with the following items:

1 x Gasket goo

1 x Drain plug washer

1 x Head gasket - stock

1 x Rear Crankshaft oil seal

2 x camshaft oil seals

24 x valve stem oil seals

1 x rocker cover exhaust gasket

2 x rocker cover intake gasket

1 x crankshaft oil seal

1 x Intake manifold collector gasket

1 x manifold gasket

1 x exhaust manifold gasket

1 x oil strainer gasket

1 x oil pump gasket

1 x throttle chamber gasket

1 x O ring seal

1 x A.A.C valve gasket

I can take hi-res shots of everything so let me know if you want photos. Everything listed is brand new with some unopened.

Cheers,

G

Originally posted by T0nyGTSt

The Jun cams are for the RB25det?

http://www.junauto.co.jp/products/cylinder...-nissan.html?en

T.

Everything is for the ECR33 RB25DET. Cam gears fit RB20, RB25 & RB26. Cams are Jun, but a special order with higher lift then their standard ones... They're the largest lift that will fit the head without having to machine the head. You must fit the stronger valve springs with these cams.

G

Originally posted by rb20-calais

are they both cam wheels? $200 each or for the pair?

Evan

Ooops, I meant for the pair. Price has been revised. Head Gasket is a Jun one, not HKS. (Most of these parts are rebadged anyway... :D)

Sorry about that.

G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...