Jump to content
SAU Community

Wold 3d For Skyline

tdkmatt

By tdkmatt,
in Western Australia

 Share

Recommended Posts

tdkmatt Enthusiast

tdkmatt

Posted
Posted

hey, ive got greey emanage ultimate and havent installed it and tuned it as yet and ive got wold 3d v4 and i think id rather go with a full standalone than a piggy back, anyway i cant get a list of parts i need to install it straignt into my car, ive got wolf, hand controller, loom, but what sensors and such do i need?

Link to comment
https://www.sau.com.au/forums/topic/271407-wold-3d-for-skyline/
Share on other sites
reNEGaDe88 Proficient

reNEGaDe88

Posted
Posted (edited)

Wolf would be a way better ecu seeing as it a full ecu. There will be many more parameters that can be adjusted more if its a stand alone one. The guys at Top Racing tune the ecu's. I have a wolf 3d and my car runs well with the tune.

I think u need an adapter loom box and I think a MAP and water temp sensor. You don't need to run a AFM if u don't want to unlike the Apexi Power FC's. Give the guys at Top Racing a call for info.

Edited by reNEGaDe88
datsit Contributor

datsit

Posted
Posted

with you wolf you will only need the bigger turbo. standard injectors are good for just over 400rwhp. my car has a rb25 with a wolf and 040 and its making 390rwhp, my friend has a r33 gts that was 420rwhp with a wolf and standard injectors. Only thing is with wire in it only has 4 ignition out put so you have to batch fire the coils, the plug in has 6 out out unless you have the wolf v4 plus.

mitchy_ Grand Master

mitchy_

Posted
Posted
with you wolf you will only need the bigger turbo. standard injectors are good for just over 400rwhp. my car has a rb25 with a wolf and 040 and its making 390rwhp, my friend has a r33 gts that was 420rwhp with a wolf and standard injectors. Only thing is with wire in it only has 4 ignition out put so you have to batch fire the coils, the plug in has 6 out out unless you have the wolf v4 plus.

stock injectors will NOT make 400rwhp, they are 370cc and good for about 300rwhp.

either both of you aren't making anywhere near your 'supposed' power, or you're both running lean as f**k.

Dsturbd Grand Master

Dsturbd

Posted
Posted
standard injectors are good for just over 400rwhp. my car has a rb25 with a wolf and 040 and its making 390rwhp, my friend has a r33 gts that was 420rwhp with a wolf and standard injectors. Only thing is with wire in it only has 4 ignition out put so you have to batch fire the coils, the plug in has 6 out out unless you have the wolf v4 plus.

I recall a 33gts-t with wolf ecu making 511hp on stock injectors a few years back :blink:

tdkmatt Enthusiast

tdkmatt

Posted
  • Author
Posted

umm, well i dont have the plug and play version, ive got the wire in, so pretty much my tuner will know what to do? and does anyonme have the turbo and or injectors for sale?!?!?!?! id like to put some phwen down

Brockas Proficient

Brockas

Posted
Posted

Who's you're tuner?

There's only 1 person in WA with the patience to tune Wolf, everyone else will tell you to ditch the ECU and buy a Power-FC.

PICK YOUR TUNER FIRST, then buy the ECU he recommends. Not the other way around.

R32 Driver Mentor

R32 Driver

Posted
Posted

Yep pick a tuner before you buy an ecu, no matter how cheap the ecu may be

also something more popular like power fc, haltech etc would be better incase you dont like the tune

you can tell the tuner to f**k off

cars use/hp goal = choice of turbo + injector

reNEGaDe88 Proficient

reNEGaDe88

Posted
Posted

Emanage is a good piggy back ecu. Status tuning work with them. Slap it in the for sale section if you want to sell it.

Agreed with Mitchy, stock injectors are good for 300rwhp, not much more safely.

You can get a stock turbo hi flo'd for 2K and then u could make around 350hp I think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...