Jump to content
SAU Community

Recommended Posts

I have for sale an as new HKS T51R SPL turbo kit to suit any nissan skyline GTR. This kit is currently on an R33 GTR. This kit is effectively brand new and has only recently completed its first dyno tuning work. Car is for sale and new owner wants smaller turbos.

This is the legendary HKS T51R SPL (not Kai) turbo rated at 1000hp.

Included in the kit is:

HKS T51R SPL Turbo, Triple HPC coating on exhaust housing (black), HPC silver on compressor housing

HKS 50mm external wastegate with screamer pipe to atmosphere.

HKS Manifold, Triple HPC coated black.

Custom inlet pipe with HKS filter, Painted metallic black.

HKS hot pipe, Painted metallic black

HKS V-band front/dump pipe (turbo to Cat)

All water and oil lines, feed and return.

Everything in this kit is included, simply bolt up to your existing engine, retune and drive away.

Everyone knows the potential of these turbo kits.

$7,500

Ruari

Perth

post-46799-1243229562_thumb.jpg

post-46799-1243229575_thumb.jpg

Edited by LostInTheWoods

Hey Gordon,

Sorry, but I can't reply to PM's as I don't have 10 posts yet. I already have the turbo's I need for the job so I don't need more!

(Can you PM me what you think the price difference is between your turbos and this kit just in case?)

Thanks for the offer though.

Ruari.

HKS T62, jeesus, what is that rated at?

And yes, this kit is off the 101 car.

The T62 is rated for 1100hp and sells for a bit over $6500 just for the turbo, so I'd say that your package is a bloody good deal, considering what you get, wish we had the money mate, good luck with it.

Actually Sebastion it is rated at 1200hp by HKS.

are you sure trent, because they are officially rated at 1100ps which equates to roughly 1100hp, unless I am wrong...

and why are you selling yours anyways, you haven't even had the pleasure of using yours, they're so rare and expensive...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...