Jump to content
SAU Community

Recommended Posts

I wanted to do a little project on my skyline with relocating the turbo to some where hidden, and just have a few questions like, Is there any room besides the right side of the engine that could fit the stock turbo and the pipes bending into it? Would i have to buy a new manifold to attach piping? Estimated cost of custom piping and bends and labour of installing it some where else? Would i need any other parts to make it work or is it just adding the pipes and bends?

I'd be grateful for any feed back on my questions and no negative comments please cause i already have thought about all the negative shit about this operation.

Ta.

Link to comment
https://www.sau.com.au/forums/topic/271662-turbo-re-locating-r33-gts-t-96/
Share on other sites

Thats not the smallest and easiest project you could come up with :D

If you want to hide the turbo (the stock position is quite hidden IMO) then you'd need a new manifold, but none around positions the turbo anywhere hidden. Just keep it as it is stock and make custom heatshield to hide that and the downpipe :down:

You could allways try to fit it closer to the front, then it would be hidden behind some of hte engine parts but it would need alot of new piping to be manufactured. Not a problem as long as you know how to though :D

cant help but ask why would you want to relocate the stock turbo? you cant even see it in stock form under all the heat shields and pipes. sounds like a silly idea? for the sake of this argument you could possibly make up a pipe between the manifold and the turbo to lower the turbo towards the gearbox, but you will compromise response.

you will also be up for new oil/water lines $300, dump pipe $300, induction pipe $150, bov plumb back pipe $50 & intercooler pipes $300 and much much more. So not worth the effort, time and money.

a complete waste of time, don't even bother. sorry but thats just my opinion.

Thats not the smallest and easiest project you could come up with :D

If you want to hide the turbo (the stock position is quite hidden IMO) then you'd need a new manifold, but none around positions the turbo anywhere hidden. Just keep it as it is stock and make custom heatshield to hide that and the downpipe :rofl:

You could allways try to fit it closer to the front, then it would be hidden behind some of hte engine parts but it would need alot of new piping to be manufactured. Not a problem as long as you know how to though :down:

Yeah the custom heatshield idea sounds much better, thanks ill do some research into that :D

cant help but ask why would you want to relocate the stock turbo? you cant even see it in stock form under all the heat shields and pipes. sounds like a silly idea? for the sake of this argument you could possibly make up a pipe between the manifold and the turbo to lower the turbo towards the gearbox, but you will compromise response.

you will also be up for new oil/water lines $300, dump pipe $300, induction pipe $150, bov plumb back pipe $50 & intercooler pipes $300 and much much more. So not worth the effort, time and money.

a complete waste of time, don't even bother. sorry but thats just my opinion.

Yeah i see your point. thanks, i honestly just thought it was cost of piping and labour but obviously not.

Yeah i see your point. thanks, i honestly just thought it was cost of piping and labour but obviously not.

In all seriousness i cant see the point of doing that? if its just to hide it from cops then that's silly. they are not stupid, they will still see the car is forced induction and it comes up when they check your rego. Its like taking a badge of a xr6 turbo, it looks the same as a normal xr6 but you still know its turbo.

If your not modifying your car then leave it in stock form, service it, look after it and just enjoy what the car has to offer.

cheers,

alex

Edited by 217/r33

^ avoiding P-plate restrictions i reckon.

End of the day, impossible and nothing more than a pure and utter waste of time.

There is no benefit to moving it, only hinderance - and hence my response is negative because you still get busted by the police

^ avoiding P-plate restrictions i reckon.

End of the day, impossible and nothing more than a pure and utter waste of time.

There is no benefit to moving it, only hinderance - and hence my response is negative because you still get busted by the police

+1

my point exactly, grow up and get these silly thoughts out of your head. if you are a p plater just tough it out otherwise you will pay the consequences.

Funny thing is, a mate of mine has done this to an old BMW while on his P's. He was pulled over numerous times and they never picked up on it, just his luck i guess.

Btw it was a shit and dodgey setup, needs some sort of pump to push the oil back to the motor.

Edited by Super Drager
needs some sort of pump to push the oil back to the motor.

electric scavange pump hooked up the the oil drain, APS supply these with there twin rear low mount turbo kits for the VE V8's as the turbo oil drains are only just above sump level.

electric scavange pump hooked up the the oil drain, APS supply these with there twin rear low mount turbo kits for the VE V8's as the turbo oil drains are only just above sump level.

I was going to do the setup myself, but for the amount of money it costs it is better to do a conventional setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...