Jump to content
SAU Community

Recommended Posts

Yo!

Well, most of us would change engine oil a fair bit, and maybe after a couple track days etc, but how often would you change brake fluid and give it a flush?

Im talking more cars used for track days etc here,

Would you say, do it same time as doing engine oil change?

say after 3 track days or so?

more or less?

cheers!

chris

Link to comment
https://www.sau.com.au/forums/topic/271688-how-often-to-change-brake-fluid/
Share on other sites

Brake fluid should be fine unless it's old or you've boiled it IMO.. doesn't need doing as often as engine oil but if you gave it a quick bleed every oil change then you'd be sorted. That'll keep the fluid moving through the lines enough that a full flush isn't necessary, if you regularly track it.

I think I did my brakes about a year ago, did a wakie day today and my coolant temp started moving before I had brake problems.. although the brakes were spongy after sitting in the pits they were fine after 1 pump once i got back in ;)

DOT 3 Should be changed every year DOT 4 every two years this is under normal driving conditions, as other have said if you get brake fade/boil the brake fluid change it as you lowering boiling temp of fluid. once you boil brake fluid its useless.

i've been doing mine before every track day lately, though not by choice. Stupid leaky rear caliper....

Normally i'd do it every 3 months or so with motul rbf600 or penrite sin.

I tend to look at this sort of stuff in terms of money it costs me if i don't do it. 20 bucks spent every 2nd or 3rd day vs losing track time which roughly works out at around 400/day for me inc entry, travel and trailer hire.

I don't think there is necessarily a golden rule. It's all about how the peddle feels. Environmental factors as well as how hard you brake on the track will determine how long it lasts. If the the peddle ain't solid anymore... New fluid time.

With my track abilities (hah which ain't that amazing) every couple of track days is so fine. But if its just street driving well over a year should be fine even with cheap fluid.

Cheers

Cam

I just run the good stuff through.

Cheap stuff is shit, no better than 3 day old rbf 600 if any gets left in the lines.

Just run it through until you see clean fluid come out the other end and you'll get 99% of the old stuff out.

every 12 months at most, unless you manage to boil it - if you do change it straight away.

unfortunately the better quality the fluid, the more water it absorbs, so the more often you have to change it. cheaper stuff might last a couple of years in the average mum's camry

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...