Help With Install Of Cusco Brake Cylinder Stopper On A R32

[Moodles2]

My Cusco BCS arrived in the mail today and and tried to install it on my 32 GTR, but the 2 suspension tower nuts near the master cylinder won't come loose, and because of lack of space I don't have room to get my socket wrench in there, only my adjustable spanner. I tried WD40 but didn't help much, and I haven't seen Penetrene on sale here in SA in ages.

[White GTS-T]

I used an "extra long 0' offset spanner". Something along the lines of what's in this small pic, if you can make it out. Any place that can get decent tools should be able to get you a set. From memory, i got my set of sidchrome ones from my local repco for about $160. Hope this helps.

http://www.sealey.co.uk/images/products/Th...ails/AK6311.jpg

[_Ryan_]

if things are on tight i recommend using a high quality spanner/socket(such as sidchrome) as i find i round nuts less as they fit quite well!

[Moodles2]

I got them off finally, gave them afew WD40 treatments.. turned out I have a big ass 17mm ring spanner already, put it on and after some gentle persuasion with a 5kg hammer I loosen them. The hardest one was the one below the master brake cylinder, I nearly had to resort to taking my strut tower bar off as I had no room to hit the end of the spanner.