Jump to content
SAU Community

Apexi Power Fc Commander / Hand Controller - R33 Gtst!, Just The Controller, Not The Computer!

Ari25t
 Share

Recommended Posts

Ari25t Apprentice

Ari25t

Posted
Posted

Guys,

I have a Power FC Hand controller for sale. It was for my R33 gtst but it may fit other models.

Used for 1 week only. It's in excellent condition but does have a couple of very light scuffs on the screen from sitting in my Glove box for that week.

Model Serial No. PFC ECR33010-1104

Numbers on back of controller: FCC 020-08918

This is a genuine Apexi Controller that was purchased in a complete Power FC package. *it's not an aftermarket item.

$300

Item can be picked up from North Sydney area or shipped at a flat rate of $10 anywhere in Oz.

post-54982-1243386186_thumb.jpg

Ari25t Apprentice

Ari25t

Posted
  • Author
Posted (edited)

Haha, Yes it would look very familiar. Hope I don't get a letter from your lawyer ;)

The controller is from my Series 1 R33 but can anyone confirm wether there is a difference between series 1 and 11 just for the controller?

heading looks very familiar :D

i thought someone had rebumped one of my threads :yes:

Edited by Ari25t
  • 1 month later...
W0rp3D Grand Master

W0rp3D

Posted
Posted

Can you do me a favour, break the casing and scratch the screen cover, that way you will sell it cheap and i can pull it apart and turn into a stand alone gauge :(

  • 4 weeks later...
Ari25t Apprentice

Ari25t

Posted
  • Author
Posted

Haha, I did consider breaking the casing and scratching the screen cover to sell it cheap but it sold before I got the chance :laugh:

Cheers guys

**Item Sold**

Can you do me a favour, break the casing and scratch the screen cover, that way you will sell it cheap and i can pull it apart and turn into a stand alone gauge :geek:
W0rp3D Grand Master

W0rp3D

Posted
Posted
Haha, I did consider breaking the casing and scratching the screen cover to sell it cheap but it sold before I got the chance :down:

Cheers guys

**Item Sold**

It amazes me how well people look after these, its not as if there hard to get on there own or anything :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...