Jump to content
SAU Community

Recommended Posts

Hi Guys

This is a "evolution" of an old post - sold stuff has been taken off, prices have been updated and some more stuff added. I will add photos as I find them.

Engine parts:

post-a191811-RB26-Block-1.jpg

R33 RB26 Block - Standard 05U

Standard 86mm bore size

Will need "tunnel bore" as cradle is off another block

$300

R33 RB26 Block - 05U

87mm Preped by ADVAN (stamped into block)

Turbo oil feed has been re-enforced

Has crack around one head stud

Came out of running car

(I bought this off another forum member apparently can still be used - but I havent investigated any further)

$250

post-a191796-GTR-Rods.jpg

RB26 Standard Rods

Good Condition

Ideal Upgrade for RB25 apparently?

$150 set

RB26 Standard Rods

Good Condition

Fitted with ARP Studs

$200 set

post-a191787-Cam-Gears-1.jpg

Adjustable Cam Gears

Suit RB20 / RB26

Inlet and Exhaust

$150 pair

post-a191788-Cam-Gears-3.jpg

Adjustable cam gears

(exhaust just cnc slotted)

$120 pair

post-a191789-Cam-Gears-Stock.jpg

Stock Cam Gears

RB26

$50 pair

post-a191815-Sump-With-Diff.jpg

RB26 Sump With Diff

Came off R33 (suits R32 as well)

$450

post-a191817-Turbos1.jpg

Rebuilt R33 GTR Turbos

New Bearings and Seals

360 degree thrusts

N1 Exhaust Turbine

Never Used

$POA Arriving Soon

(pic)

GTR Group A Turbos

Modified Housing

Fully Rebuilt

Came of a car prepped by Mines

Available soon

$POA

Suspension parts:

post-a191791-Cusco-Tops.jpg

Cusco Pillowball Tops

Suit BNR32

Suit many types of suspension

As is

$150 set

(pic)

Cusco F Upper Control Arms

Suit BNR32

Stronger and allow more neg than stock arms / good upgrade for worn stock arms

$POA Available soon

ELECTRONICS

post-a191782-AFM-s-2.jpg

Z32 80mm AFM's x 2

$450 pair or $500 with plugs

post-a191790-Chip.jpg

Japaneses Chip for R32 GTR ECU

Fujitsaki SPL (?)

Chip Only

Have used this chip and it works well on our fuel and 18psi

$80

post-a191813-STOCK-ECU.jpg

Stock GTR ECU

Missing top and bottom lid (not as pictured)

(I put them on my power FC...)

$150

post-a191802-IMPUL-ECU.jpg

IMPUL ECU

Suit R32 and R33 GTR

Good upgrade if you are running intake and exhaust mods

Good AFR's

$250

(pic)

R32 GTR Gauges

Three Gauge Cluster from centre console

$100

post-a191808-Oil-Pressure-Gauge.jpg

JDM "LMOO" Oil Pressure Gauge

Mechanical includes braided line

$50

R32 GTR Body Parts

post-24243-1243422957_thumb.jpg

Nismo style sideskirts

Rear Section only

(fit up / over factory skirts)

$150 pair

post-24243-1243423023_thumb.jpg

Trust style read pods

$150 pair

or both Nismo skirts and trust posds for $250 the lot

WHEELS

post-a191797-GTR-with-Technos.jpg

Technomagnesio

Magnesium alloy 5 spoke rim

17 x 9 +25 (suit GTR32)

Just been Stripped

can powdercoat in your choice of colour

$POA Available soon

post-a191810-rays-volk-TE37G-lg.jpg

Rays TE37

17x8 / 17x9

GTS-T offset ( +30 ish)

Just Been Stripped

can powdercoat in your choic of colour

$POA Available soon

post-a191824-Tyres-255-1.jpg

17" Tyres

255/40 hankooks (?)

70%

$150 pair

post-a191818-Tyres-255-2.jpg

17" Tyres

255/40 Yokohama Advans

70%

$200 pair

post-a191794-GTR-Air-Box-1.jpg

Stock R32 GTR Airbox

$150

post-a191783-Air-Filters-Apexi.jpg

Dual 140mm Apexi Power Intake Filters

Suit GTR with 80mm AFM's

$120 for the pair

(pic)

Stock GTR Intercooler

$200

(pic)

ARC Intercooler

Sut R32 and R33 GTR

(R34 with small mod)

$1250

EXHAUST

post-a191792-Dumps-std-.jpg

Stock RB26 Dump Pipes

$50 pair

post-24243-1243422678_thumb.jpgpost-24243-1243422697_thumb.jpg

NISMO cat back exhaust

R34 GTR

Stainless 80mm piping

Very good condition

2pce can be shipped

$500

SEATS

post-a212936-BRIDE2.jpg

Bride GIAS "Style" Seat

Exactly like GIAS / Low Max seat

Just doesnt say bride anywhere

$500 each (2 seats only)

Open to offers on some stuff - other stuff I 'm not

No lowballers please. Available for pickup in melbourne or will ship at buyers expense.

PM or email me [email protected]

Edited by Antimatter
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hi Guys

Thanks for the interst thus far - FYI I have listed the R34 GTR exhaust and the Advan Block on ebay (starting at 99c!) - auction ends sunday 7th of June.

Cheers

Hey, very interested in the cusco strut tops, what condition are the bearings in? Could they be easyly enough replaced?

How much would shipping to perth be you think?

Interested in 1 AFM - are you willing to separate? Also, they should work on a r33 GTST?

post-a191787-Cam-Gears-1.jpg

Adjustable Cam Gears

Suit RB20 / RB26

Inlet and Exhaust

$150 pair

Are the blue cam gears new or used???

Hi guys

Cam gears are new - after 2k for the Group A turbos

Cheers

Steve

post-a191787-Cam-Gears-1.jpg

Adjustable Cam Gears

Suit RB20 / RB26

Inlet and Exhaust

$150 pair

Are the blue cam gears new or used???

Guys

Thanks for all the messages - FYI:

Z32's And Apexi Filters SOLD pending payment (Harry)

Air Box on hold pending payment (petra)

Cusco tops SOLD pending payment (BNR#@)

Nismo Skirts and Pods SOLD pending payment

Cheers

Steve

pm sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • lights are on just the one click.  
    • Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...