Jump to content
SAU Community

Recommended Posts

hi guys,

im about to order t-clamps for my intercooler hosing on my gtr...can anyone tell me what the outside diameter is?

for some reason i think its 80mm but i need to confirm (i cant measure this as my hoses are with my builder who is currently away)

thanks :yes:

Link to comment
https://www.sau.com.au/forums/topic/272125-intercooler-hose-for-gtr/
Share on other sites

do yourself a favour and don't! T-bolt clamps are rubbish. personally I wouldn't use one to hold the expansion joint on my dunny!

you gotta be shitting me? i hope your not talking about the ones i've put a pic of below as they are all i will ever use for intercooler piping as they are by far the best for it out there i have not once had a hose pop off using these but i cant say the same for the rest of the hoseclamps out there, sure there bit big and bulky but they work and they work well!

clamps2.jpg

do yourself a favour and don't! T-bolt clamps are rubbish. personally I wouldn't use one to hold the expansion joint on my dunny!

you just cracked me up LOL, not good enough to hold a bog :/

ive always thought these are the best available?

you gotta be shitting me? i hope your not talking about the ones i've put a pic of below as they are all i will ever use for intercooler piping as they are by far the best for it out there i have not once had a hose pop off using these but i cant say the same for the rest of the hoseclamps out there, sure there bit big and bulky but they work and they work well!

clamps2.jpg

i see u have a gtr - what size t clamps are u using for your I/C hoses?

i have 3 choices:

a. 74-79mm

b. 80-85mm

c. 86-91mm

...now u may understand why i am confusED

you just cracked me up LOL, not good enough to hold a bog :/

ive always thought these are the best available?

noooo, they are the cheapest and best marketed ones available! not the best. they have flat insides and due to their design are usually way over tightened. you should not be using clamp force alone to seal the pipe. you want a clamp with beads in it to create seals and with rolled edges. sard dual bead clamps are my favourite but they are just re-selling another company's clamps i'm sure. the norma constant tension clamps look good too.

you want the clamps that have an inner ring, with dual beads, and rolled edges and then a clamp that goes over it. these wont cut into your joiners and they don't need to be wanged up to 1000ft/lb of torque just to seal either.

In that thread above I think someone posted a link to another brand of dual bead clamps, but even the sard brand ones are not expensive. plus it's not like you have to keep buying them over and over.

these are the ones to get: http://www.skylinesaustralia.com/forums/in...t&p=4455418

out of all the cars i've used the Tbolt clamps on, i have never had a leak from any of them at idle or under boost

as for the answer, sorry dude i actually dont know what size the standard gtr stuff uses.. like alot of r32 owners.. my gtr doesnt have an engine in it at the moment lol

80-90mm should to it. something around that will usually have a wide enough range to fit. if you have to choose 80 or 90, I'd choose 90. things get pretty big by the time you add pipe OD plus joiner OD.

I'm interested in the beaded type clamps, however I can't find anywhere which sells them around here, so I've stuck to using Cummins Tee bolt clamps, which as long as they are done up in the right spot seem to work really well (in conjunction with their silicon hose which has a textured wrapping on it causing the clamps to stick really hard into it). $5.90 per clamp is exxy though, I'm just replacing mine as they start to stuff up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...