Jump to content
SAU Community

Recommended Posts

that bikes gross. looks like the started making a decent looking bike then went f**k it when they got to the front of it

3.jpg

2.jpg

1.jpg

killin it.

when i went back to the states to visit family, my old mate had bought one of these srt charger or whatever it was.

murdered the f**k out! limo tint, tinted headlights and brake lights, satin black 22" rims and slammed such a tuff sounding car!

ill be spending a bit of time in jersey, and hopefully at least a month in nyc. but i wont be in the states for 2+ years. got another (minimum) 9 months here, then a minimum 18 months in canada.

thought id share a couple of super cars i aint seen before, maybe ive been living under a rock.

post-31501-1271202658_thumb.jpg

post-31501-1271202664_thumb.jpg

P4/5 ferrari 1 off build from the last enzo. personally i think its way cooler then the enzo. no that geek in the pic does not come with the car

http://en.wikipedia.org/wiki/Ferrari_P4/5_by_Pininfarina

first alpha i ever thought was cool

http://en.wikipedia.org/wiki/Alfa_Romeo_8C_Competizione

post-31501-1271202650_thumb.jpg

Get a set of R33 GT-R wheels, thats what I'd get for track wheels - powder coated gun metal grey, fat slicks - the offsets look decent on GTST's and with thick rubber even fill the guards nicley on a R32 GTR if your going for the 'track' look

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...