Jump to content
SAU Community

R33, Rb25det None Neo To Neo Head Conversion?

r33canada
 Share

Recommended Posts

r33canada Community Regular

r33canada

Posted
Posted

so i dont know if this has been brought up before and i tried to briefly search to no avail.

i have a 93 r33 s1,

im wondering if its possible or if theres any point to converting to a neo head and whatnot. not a complete engine swap just the head.

is there any point to it?, if so any increase of anything or is it totally stupid and pointless.

im wondering because the neo is suppose to be emission efficient or something like that and here in canada they are anal out the ass about emissions and skylines in general. so if theres a way that its worth it to make them happy and gain any performance then im willing to do it.

thankyou so much for any help

Kranker Collaborator

Kranker

Posted
Posted

dont think they have significantly different blocks, people run both neo heads and hydraulic rb25 heads on RB30 blocks, so i cant see why you couldnt fit one to a non-neo rb25

but dont take my word as gospel, im just taking an guess from i know

if it is possible, then the advantages would be changing from hydraulic lifters to solid lifters (like on a 26), and more modern cyl head design.

but for the cost involved it would probably be just as easy to put an rb26 head on your block

the neo also has smaller combustion chambers than both the rb25 and 26 so you will be raising your compression ratio. so you will probably need to fit some lower comp pistons to get ur comp ratio where you want it.

in my opinion its a bit pointless. yes the neo is a slightly better head but i cant see you gaining a great deal of power or reducing emissions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...