Jump to content
SAU Community

Recommended Posts

I picked up a set of work meisters: 114.3x5 18x11 & 114.3x5 18x10

Basically I want to paint strip all the old clear coat and then have them re-polished and have the finished product re-sealed.

I also want the centers powder coated black.

Does anyone know any places that do this? Preferably in the city area, or Hawthorn, Kew or Richmond area...

I don’t want my three piece to be taken apart.

I took one to this shop in whoop whoop land and they wouldn't do it so now I am looking around.. pls help!!

-Karla

worx3.jpg

worx2.jpg

Edited by lilkaaay
Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/
Share on other sites

^^I was just gonna say that.

Damn Karla!

Hot Wheels!

Have you tried a panel beater?

Yes I have taken it into a panel beater, they suggested something different to what I have in mind, I thought about it and then changed my mind... so instead they forwarded me the contact details of a wheel place. I took one wheel in and they said that they did not want to do the job, they did not have the time...

I had a spray painter attempt to do the job on one wheel but again it was not what I want.

Keeping all my options open, I don’t want to take it to more than one place... I want to drop it off somewhere and pick them up, polished, re-sealed and powder coated.. ready to put the tyres on.

Edited by lilkaaay
Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633536
Share on other sites

Yes I have taken it into a panel beater, they suggested something different to what I have in mind, I thought about it and then changed my mind... so instead they forwarded me the contact details of a wheel place. I took one wheel in and they said that they did not want to do the job, they did not have the time...

I had a spray painter attempt to do the job on one wheel but again it was not what I want.

Keeping all my options open, I don’t want to take it to more than one place... I want to drop it off somewhere and pick them up, polished, re-sealed and powder coated.. ready to put the tyres on.

Ah can... Don... Do it for you..?

If not try Graeme Cuthbert Automotive.

They deal with Prestige cars so their quality of work will be great.

http://www.cuthbertautomotive.com.au/

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633563
Share on other sites

Ah can... Don... Do it for you..?

If not try Graeme Cuthbert Automotive.

They deal with Prestige cars so their quality of work will be great.

http://www.cuthbertautomotive.com.au/

No he cant unfortunately. He does not polish wheels but he will be painting my car again. Not sure if I want to go back to pearl white or paint it black or a darker gun metal. STUCK!! LOL.

Anyways thank you, I will keep Graeme Automotive in mind... cruize soon yeah?

Edited by lilkaaay
Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633576
Share on other sites

No he cant unfortunately. He does not polish wheels but he will be painting my car again. Not sure if I want to go back to pearl white or paint it black or a darker gun metal. STUCK!! LOL.

Anyways thank you, I will keep Graeme Automotive in mind... cruize soon yeah?

LOL!

Go Pearl White car with polished lip on black centre Work Meisters (Like you said).

When you get the clear coat off, you could even just polish it yourself LOL! Start rubbin' Karla.

Would look friggin tuff!

Yeah cruise soon but my car will be going to Graeme Cuthbert Automotive to get fixed as I got rear ended... Damn it!

When I get my car back we do a meet up again.

Keep you posted.

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633600
Share on other sites

LOL!

Go Pearl White car with polished lip on black centre Work Meisters (Like you said).

When you get the clear coat off, you could even just polish it yourself LOL! Start rubbin' Karla.

Would look friggin tuff!

Yeah cruise soon but my car will be going to Graeme Cuthbert Automotive to get fixed as I got rear ended... Damn it!

When I get my car back we do a meet up again.

Keep you posted.

The person who attempted to fix one wheel started rubbing it back and it went wrong!! Luckily it was only the size of a five cent piece... I took it into the panel beaters and they had a go, still bad news!!

As for the doing it myself... the panel beaters suggested to mask it up and paint the centers black and i got all excited because I wanted the painter to do three and then i wanted to paint one of them myself just for fun but then I decided that i want them powder coated.

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633623
Share on other sites

hello

try these places

Ajax Wheel Repairs

Cnr Exley Drv & Ewar St

Moorabbin

VIC, 3189

Australia

Contact Details

Ph: (03) 9555 7737

Ace Alloy Wheel Repairs

U6/ 67 Shearson Crs Mentone 3194

(03) 9584 8229

Coburg Mag Wheel Polishing & Repair Centre

Flag no.4

27 Audrey Ave Coburg VIC 3058

ph: (03) 9354 4641 Wheels & Rims—Automotive

The Mag Wheel Centre

15 Palmer Parade Richmond 3121

Tel. + 61 3 9421 1266

out of all them Coburg Mag Wheel Polishing & Repair Centre was the best for my needs to re-machine/polish the dish, powdercoat the spokes to what ever colour i wanted and reseal the rim. im guessing thats what your after?

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633833
Share on other sites

I might need one, because the work result done by a well known wheel place around cheltenham just peel itself off and flake off after 3 months... very unhappy with their worksmanship and basically at $180 cost they don't wanna know about it.

I found that they did not use a primer before recoating, and probably didn't put a hard coat on that's why it's peeling off...

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4633910
Share on other sites

out of all them Coburg Mag Wheel Polishing & Repair Centre was the best for my needs to re-machine/polish the dish, powdercoat the spokes to what ever colour i wanted and reseal the rim. im guessing thats what your after?

that sounds good... yes i want them re-machined, polished and powder coated and re-sealed. do u know roughly how much it costs?

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4634068
Share on other sites

i got quoted $110 per wheel (if you have rubber on the wheel they will remove it for ya) but that was fixing up gutter rash also. if your rims don't require any fixing i guess it will be cheaper

but i was also getting 8 wheels done so the price may have dropped a little bit.

hope that helps. best to call them. cant remember who i spoke to but they were very helpful

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4634107
Share on other sites

i got quoted $110 per wheel (if you have rubber on the wheel they will remove it for ya) but that was fixing up gutter rash also. if your rims don't require any fixing i guess it will be cheaper

but i was also getting 8 wheels done so the price may have dropped a little bit.

hope that helps. best to call them. cant remember who i spoke to but they were very helpful

thank you that helps a lot!

Link to comment
https://www.sau.com.au/forums/topic/272999-work-meisters/#findComment-4634128
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...