Jump to content
SAU Community

Recommended Posts

My excedy 9 puck cushioned clutch is dead. It lasted about 12 months. 8 of those months was with a mild 260rwhp the rest was 390rwhp. My car is a daily driver and i travel in a fair bit of peak hour traffic on the weekdays which is not what hd clutch's are designed for. I made it clear what the car would go through and the power i would like it to handle 300rwkw.

I dont want to spend over a grand for a clutch but i want it to last more then a shitty 12 months. Is anyone on similar power that has had there clutch last similar conditions. I wouldnt say i am hard on the clutch either it has been treated fairly well.

Link to comment
https://www.sau.com.au/forums/topic/274063-hd-clutch-for-300rwkw/
Share on other sites

Excedy hyper single. Pricey but wicked. Have had mine for 4 years and has copped all types of abuse and tons of city driving.

Also every man and his dog on this forum swear by Jim Berry (i've never used him but have his number on standby in case i ever need to).

07 3847 9999.

Excedy hyper single. Pricey but wicked. Have had mine for 4 years and has copped all types of abuse and tons of city driving.

Also every man and his dog on this forum swear by Jim Berry (i've never used him but have his number on standby in case i ever need to).

07 3847 9999.

according to nengun that excedy hyper single is rated to 400hp, i assume that is at engine too so that wouldnt last. What power you running?

Shit never knew they were only rated at that i'll have to have a look for myself.

I had it installed prior to me decieding to power up and also due to failure of the stock clutch after i first upped my boost. Whoops.

Dont be too fooled by the power rating on a clutch as they are testing it at extremes and rating it to a safe limit for hard use... warrenty crap!

If your not doing high RPM launches or dropping the clutch on gear changes then i dont think you will need to over power the clutch... i am running over the reccomended limit on the stock clutch 300rwhp and never once had it slip and i have had that power for over 2 years now... and i am pretty hard on my car and launches... but if i took it on a track i bet it would heat up and be destroyed in one day.

Decide how your going to drive and then decide on clutch dont just look at power as most will hold the power once engaged..

i am running over the reccomended limit on the stock clutch 300rwhp and never once had it slip and i have had that power for over 2 years now...

I was in the same boat, thinking I had stock clutch and "wow omg it's lasting strangely long"... turns out there was a Nismo organic clutch and a Nismo chromolly flywheel in there.

Well i just had a 40 minute conversation with Jim Berry. I remember speaking to him a year ago about the same thing. It was even more torturous the second time. A man full of knowledge and useful answers to my questions but fark i basically had to beg him to get off the phone.

I am sold though

either full monty organic or carbotic. $1050

And yes to Nismogtt you are right on the money

Well i just had a 40 minute conversation with Jim Berry. I remember speaking to him a year ago about the same thing. It was even more torturous the second time. A man full of knowledge and useful answers to my questions but fark i basically had to beg him to get off the phone.

I am sold though

either full monty organic or carbotic. $1050

And yes to Nismogtt you are right on the money

ahahaahaha brings back memories.

well ive got the carbotic 4200lbs gtr pressure plate 6 puck clutch from jim and im about to tune it up wiht my 2835 pro s kit on my r34gtt.

ill let you know how it holds up.

but ill tell you now it feels pretty close to stock but bites like a pitbull.

I was in the same boat, thinking I had stock clutch and "wow omg it's lasting strangely long"... turns out there was a Nismo organic clutch and a Nismo chromolly flywheel in there.

Would be nice if your right and i do have a NISMO or something... means i wont have to replace it for a while still :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...