Jump to content
SAU Community

Recommended Posts

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4653954
Share on other sites

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654000
Share on other sites

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Thanks for the backup =D

But yeah there are any number of reasons it could be like that.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654161
Share on other sites

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

yes thats pathetic

theres a black R34 GT-T with a GT-R badge at the boot

the whole car looks nothing like a GT-R

to me thats degrading the GT-R image

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655374
Share on other sites

good luck fitting the wheels!

anyway, VERY nice car Andy. wish i could afford one myself!

Haha, nah, it's a little joke between Andy and I. Told him not to put crappy wheels on the GTR! We know each other because of our STi ownership (ex for me).

From what he told me, the diffuser was stolen in Japan, and he's ordered a Top Secret diffuser as a replacement. The abscence of the carbon bonnet is a mystery..

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655530
Share on other sites

i was thinking more along the lines of the STi being 5x100 and they actually wouldnt fit the GTR :P

+1 for who cares about where the parts have gone. he is happy, thats all that matters!

exactly right.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4656157
Share on other sites

  • 2 weeks later...

Andy sent me a couple of pictures of his car, and i noticed something strange:

getattachmentrmn.jpg

His rear diff doesn't look like mine. Is it possible that his car is a non Vspec (without active diff)?

We're just trying to work out which exact model his car is. Is has Vspec II interior, but no bonnet or diffuser. Also his MFD doesn't display intake and exhaust temp, which i believe is featured on Vspec's...Hope i'm wrong for his sake!

Edited by Huy
Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4685429
Share on other sites

looks like it is not a v-spec II, the black interior is shared between the standard and v-spec II models from october 2000 onwards as are the N1 rear disc rotors so this is not really a way to tell the difference ,the MFD should have 7 parameters for a v-spec/v-specII/m-spec where as the standard model eg non v-spec will only have 5 parameters also check the tacho the 1 to 3 on the v-spec models will be compressed this is if it is the orginal speedo ,you can also check the code on the build plate look at the 6th letter it should start with GGJPRW the W means its a v-spec/v-spec II etc if it has a V instead of the W it is a non v-spec model

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4688184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...