Jump to content
SAU Community

Recommended Posts

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4653954
Share on other sites

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654000
Share on other sites

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Thanks for the backup =D

But yeah there are any number of reasons it could be like that.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654161
Share on other sites

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

yes thats pathetic

theres a black R34 GT-T with a GT-R badge at the boot

the whole car looks nothing like a GT-R

to me thats degrading the GT-R image

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655374
Share on other sites

good luck fitting the wheels!

anyway, VERY nice car Andy. wish i could afford one myself!

Haha, nah, it's a little joke between Andy and I. Told him not to put crappy wheels on the GTR! We know each other because of our STi ownership (ex for me).

From what he told me, the diffuser was stolen in Japan, and he's ordered a Top Secret diffuser as a replacement. The abscence of the carbon bonnet is a mystery..

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655530
Share on other sites

i was thinking more along the lines of the STi being 5x100 and they actually wouldnt fit the GTR :P

+1 for who cares about where the parts have gone. he is happy, thats all that matters!

exactly right.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4656157
Share on other sites

  • 2 weeks later...

Andy sent me a couple of pictures of his car, and i noticed something strange:

getattachmentrmn.jpg

His rear diff doesn't look like mine. Is it possible that his car is a non Vspec (without active diff)?

We're just trying to work out which exact model his car is. Is has Vspec II interior, but no bonnet or diffuser. Also his MFD doesn't display intake and exhaust temp, which i believe is featured on Vspec's...Hope i'm wrong for his sake!

Edited by Huy
Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4685429
Share on other sites

looks like it is not a v-spec II, the black interior is shared between the standard and v-spec II models from october 2000 onwards as are the N1 rear disc rotors so this is not really a way to tell the difference ,the MFD should have 7 parameters for a v-spec/v-specII/m-spec where as the standard model eg non v-spec will only have 5 parameters also check the tacho the 1 to 3 on the v-spec models will be compressed this is if it is the orginal speedo ,you can also check the code on the build plate look at the 6th letter it should start with GGJPRW the W means its a v-spec/v-spec II etc if it has a V instead of the W it is a non v-spec model

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4688184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...