Jump to content
SAU Community

Recommended Posts

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4653954
Share on other sites

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654000
Share on other sites

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Thanks for the backup =D

But yeah there are any number of reasons it could be like that.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654161
Share on other sites

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

yes thats pathetic

theres a black R34 GT-T with a GT-R badge at the boot

the whole car looks nothing like a GT-R

to me thats degrading the GT-R image

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655374
Share on other sites

good luck fitting the wheels!

anyway, VERY nice car Andy. wish i could afford one myself!

Haha, nah, it's a little joke between Andy and I. Told him not to put crappy wheels on the GTR! We know each other because of our STi ownership (ex for me).

From what he told me, the diffuser was stolen in Japan, and he's ordered a Top Secret diffuser as a replacement. The abscence of the carbon bonnet is a mystery..

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655530
Share on other sites

i was thinking more along the lines of the STi being 5x100 and they actually wouldnt fit the GTR :P

+1 for who cares about where the parts have gone. he is happy, thats all that matters!

exactly right.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4656157
Share on other sites

  • 2 weeks later...

Andy sent me a couple of pictures of his car, and i noticed something strange:

getattachmentrmn.jpg

His rear diff doesn't look like mine. Is it possible that his car is a non Vspec (without active diff)?

We're just trying to work out which exact model his car is. Is has Vspec II interior, but no bonnet or diffuser. Also his MFD doesn't display intake and exhaust temp, which i believe is featured on Vspec's...Hope i'm wrong for his sake!

Edited by Huy
Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4685429
Share on other sites

looks like it is not a v-spec II, the black interior is shared between the standard and v-spec II models from october 2000 onwards as are the N1 rear disc rotors so this is not really a way to tell the difference ,the MFD should have 7 parameters for a v-spec/v-specII/m-spec where as the standard model eg non v-spec will only have 5 parameters also check the tacho the 1 to 3 on the v-spec models will be compressed this is if it is the orginal speedo ,you can also check the code on the build plate look at the 6th letter it should start with GGJPRW the W means its a v-spec/v-spec II etc if it has a V instead of the W it is a non v-spec model

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4688184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
×
×
  • Create New...