Jump to content
SAU Community

Recommended Posts

hey all i've decided to sell my left overs.. car was stolen last year and these were sitting in my garage at the time:

I have a set of 5 Black wheels with a chrome lip, 17 * 7, 5 * 114.5

I bought these of a fellow forum member last year only he forgot to mention that one of them had a crack in it.

I bought a new one and had them booked in to get fitted, but my car was stolen so i was left with the wheels.

SO i have set of 5 wheels for sale: $900

1 brand new still in box never even taken out,

3 good condition and 1 with a crack in it,

have tires on all except the new one.

no centre caps except for new wheel, i think it looks better without anyway.

post-30788-1244782687_thumb.jpg post-30788-1244782731_thumb.jpg post-30788-1244782761_thumb.jpg post-30788-1244782952_thumb.jpg

This is what they look like on a 32 - previous owners car without centre caps :P

post-30788-1244783110_thumb.jpg

Also have the Stock r32 gts-t exhaust, perfect for clearing defects, good to have just in case: $250

can't be bothered taking pics its under the house, excellent condition, you all know what they look like, however, if you really want pics let me know.

Thats about it, Thanks.

Link to comment
https://www.sau.com.au/forums/topic/274395-17-black-wheels-r32-stock-exhaust/
Share on other sites

the bloke i bought these off said about 80-90% but i would say it's more like 60-80%... still plenty of tred above the indicators.

your welcome to come have a look if you would like.

sorry just realised your from nsw lol...

if it makes it easier for anyone im happy to remove the tire from the cracked rim and fit it to the new rim and just sell the 4 good ones, it'll be cheaper for postage that way.

i can take a photo of the tred left for you if you wish but you can pretty much see there's still tred left in the photo i've already posted

and if anyone wants a photo of the damaged rim let me know also.

  • 1 month later...

hey guys a few clarifications....

did i say 5 x 114.5 PCD lol, of course i meant 5 x 114.3 lol just got lazy and typed this up quickly..

also the bloke i bought these off did say about 70% tread as i just checked my emails... so he was bang on there.

I was also told they were 7.5 wide but they are in fact 7" as it says it on the back of each rim which is perfect for a 32 or 33 but i think the 34's came out with 7.5" stock so wouldn't want to go smaller i would think.

  • 2 months later...

r32 gts-t stock cat-back exhaust - 150

17" wheels, as is ~ 800

soon i will be fitting a tyre to the new rim and getting rid of the cracked one, so it will be the 4 good wheels for sale but price will be less negotiable then... if you buy them now i am willing to negotiate if you take them as is.

thanks.

  • 5 weeks later...
  • 2 weeks later...
  • 2 weeks later...

im not sure mate but from the looks of this r33 exhaust i'd say possibly..

the only thing is the hooks are in the wrong places, it shouldn't be to hard for an exhaust shop to fit it.

post-30788-1258721789_thumb.jpg

not to sure mate but its up to you, if you can't find an r33 exhaust you can give this a shot

cheers.

any ideas if an r32 exhaust will fit an r33? need to clear an epa notice for the second time
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...