Jump to content
SAU Community

Recommended Posts

The reason is that I am in Hong Kong, I like to count my pennies as I am saving for a R35 as I refuse to buy a car on credit, but I have had enough of the poor fuel consumtion of the IS200 considering the performance, It uses about 12-14l per 100km. When I had the 34GTR it used about 13-16l so I find this hard to accept. over here the 250GT and the IS200 are about the Same price so I think it may be a wise move to trade her in, and go back to a nissan.

In that case, i would do the trade in too. Probably better fuel economy, better car with more power and it's newer so most likely less maintenance.

+1 on not buying a car on credit!

  • 3 months later...

i just bought myself an 04 250gt. it;s hated on on here alot.. but i like it. I'm currently looking for simple mods to add. i dunno much about the differences in intakes and such on the 250gt. Any help on here would be appreciated.

i just bought myself an 04 250gt. it;s hated on on here alot.. but i like it. I'm currently looking for simple mods to add. i dunno much about the differences in intakes and such on the 250gt. Any help on here would be appreciated.

Hi congrats on your purchase. Unless you have heaps of spare cash lying around, I would not waste my $ on power mods. Intake mods and exhaust would probably be the most you would want to do to net you a more agressive engine note but don't expect much in terms of power gains.

Hi congrats on your purchase. Unless you have heaps of spare cash lying around, I would not waste my $ on power mods. Intake mods and exhaust would probably be the most you would want to do to net you a more agressive engine note but don't expect much in terms of power gains.

yea i figure it's not much u can do to it. but the intake situation confuses me. The g35 guys say the K&n drop in is great for the air filter...but on here i see it gets some bad reviews. Then I was looking at the stillen set up airbox and all. So kindly point me in a good direction for intake replacement. I live in the caribbean where it's almost always HOT.

Oh an also... a replcement dvd player for the one in the glove box.

I'll post some pics of my pauper's v35.

Thanx alot.

yea i figure it's not much u can do to it. but the intake situation confuses me. The g35 guys say the K&n drop in is great for the air filter...but on here i see it gets some bad reviews. Then I was looking at the stillen set up airbox and all. So kindly point me in a good direction for intake replacement. I live in the caribbean where it's almost always HOT.

Oh an also... a replcement dvd player for the one in the glove box.

I'll post some pics of my pauper's v35.

Thanx alot.

i went to see the guys at autobarn... this guy owns a s15 for track use..

i asked him about the filters for the V35... apparently K&N products has been going down hill... poor quality control...

he showed me an example... he took two new panel filters opened the package... one K&N and one BMC.

when you look clearly at the edges of the K&N. the black paint covers up to 0-1.5cm more than it requires is pretty uneven. and less filter surface area as we all know means less air flowing through.....the craftsmanship on the BMC was clearly much neater...

and all you really need for a N/A is a panel+spacer and a ztube/some type of straight piping...

unless you want to hear the 3k rpm roar of the pod :(

yea i figure it's not much u can do to it. but the intake situation confuses me. The g35 guys say the K&n drop in is great for the air filter...but on here i see it gets some bad reviews. Then I was looking at the stillen set up airbox and all. So kindly point me in a good direction for intake replacement. I live in the caribbean where it's almost always HOT.

Oh an also... a replcement dvd player for the one in the glove box.

I'll post some pics of my pauper's v35.

Thanx alot.

Pretty sure a popular setup is a Z-Tube and a JWT Popcharger. I got a 350z and just have the popcharger installed.

Just got a straight through dual exhaust installed today, plenum install coming next week! Not sure if i can feel the power difference but i sure like the sound difference haha.

My 2 cents if I were in HK....

1. Sell the IS200,

2. Buy a Honda Accord - problem solved.

If you buy such a 'large' car in HK, you'll struggle with carpark space. I am sure that you know HK carspaces are smaller...Plus, most cars get scratched easily due to people walking in between cars...

Also, Hondas retain more value in HK whilst others depreciate like no tomorrow...

On another note, in HK, it's highly unlikely that you will hit more than 80kms just becos HK is a busy city! Your car will be crawling around the city most of the time and being stopped by the many traffic lights and jaywalkers...LOL

My 2 cents if I were in HK....

1. Sell the IS200,

2. Buy a Honda Accord - problem solved.

If you buy such a 'large' car in HK, you'll struggle with carpark space. I am sure that you know HK carspaces are smaller...Plus, most cars get scratched easily due to people walking in between cars...

Also, Hondas retain more value in HK whilst others depreciate like no tomorrow...

On another note, in HK, it's highly unlikely that you will hit more than 80kms just becos HK is a busy city! Your car will be crawling around the city most of the time and being stopped by the many traffic lights and jaywalkers...LOL

agreed. you cant really drive more then 100kms at all in and around city of hk. any honda will do and will save petrol etc. new accords look nice =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...