Jump to content
SAU Community

Sard/denso 660cc Gtr Injectors

BK
 Share

Recommended Posts

BK Grand Master

BK

Posted
Posted

For sale is 6 x 660cc dark blue Denso GTR injectors. Direct replacement into stock rail and loom plugs. Perfect working order.

Just upgraded to the Denso 1000cc items as I was maxing these out at 100%.

These are the same injector SARD and power enterprise sell repackaged.

Looking for $800 delivered.

Apexi power FC PRO unit with Hand controller - very reluctant sale as I know how hard they are to source now.

$1600 firm (can deliver with decent tune too)

Also have an exedy triple plate clutch + flywheel for GTR that works but could use a rebuild

$700 delivered

Cheers

Ben

Link to comment
https://www.sau.com.au/forums/topic/275103-sarddenso-660cc-gtr-injectors/
Share on other sites
-troy- Enthusiast

-troy-

Posted
Posted
Also have an exedy triple plate clutch + flywheel for GTR that works but could use a rebuild

$700 delivered

Cheers

Ben

Hi Ben,

The clutch... is it push or pull? solid or sprung center? does it come with clutch align tool and bearing carrier?

Cheers,

Troy

BK Grand Master

BK

Posted
  • Author
Posted

The exedy clutch is a push type solid centre triple. No such thing as a sprung gtr triple cause there ain't enough room. I'll include the 18mm bearing carrier with a bearing to suit. No alignment tool though as I have a spare input shaft and use that to align my clutches. Extreme in Adelaide (1800 clutch) sell them though and they are very cheap.

-Clutch is $700 ono

-Genuine Apexi R32/R33 GTR Power FC PRO still for sale $1600 ono with hand controller

-Denso 660cc gtr injectors for sale $800 ono. Will include stock gtr rail and fuel reg for extra $50

All prices are delivered anywhere in Australia.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...