Jump to content
SAU Community

Recommended Posts

Hey everyone,

i still have a few parts lying around which i need gone this WEEK. Have had lots of interest, however alot of tyre-kickers also.

So, i am setting some new prices, which are ridiculously cheap for some items. Prices are FIRM, as i bleive that they are cheap enough already

RB25 LONG MOTOR (170,XXX KM.S)

COMES WITH ALL STOCK PARTS MINUS TURBO, ENGINE NEVER SAW MORE THAN 14PSI OF BOOST, PUSHED OUT A HEALTHY 250RWKW NEVER HAD A PBORLEM WITH IT

$1500 PICK UP MELBOURNE

APEXI POWER FC NO H/C FOR RB25 $900 PICK UP

TEIN HR COILOVERS R32 GTS-T HEIGHT ADJ W/C-SPANNERS $600

LEATHER RECARO SEATS FROM EVO 9 MR WITH RAILS FOR R33 - MINT CONDITION $3000 PAIR W/RAILS

SPATS FRONT STRUT BRACE $60

CUSCO STYLE REAR STRUT BRACE $50

HEADLIGHTS (RE-CO'D BRANDE NEW GLOBES, WIRING, SEALS) $200 PICK UP

RETURN FLOW INTERCOOLER W/CUSTOM STAINLESS STEEL PIPING $350

TRUST CAT BACK EXHAUST SYSTEM (12 MTHS OLD) $350

3" FRONT PIPE RB20/25 $100

SPLIT DUMP PIPE $70

PLENTY OF OTHER PARTS AVAILABLE, PM ME WITH YOUR EMAIL DETAILS AND I WILL SEND PICS THRU.

ALL REASONABLE OFFERS CONSIDERED, NEED THESE PARTS GONE

just letting everyone know that apart from the RB25 engine and engine related parts, all parts are for an R32 GTST

PM's replied, emails sent where possible :down:

Dump, front & decat pipe has been SOLD to R33 GTST Sereis 1 - top bloke mate, let me know how it goes fter install :D

Headlights sold pending pick up tmrw

MAKE ME AN REASONABLE OFFER GUYS!!!!!!!!!!

hey guys, must did a bit of shopping around on various interweb sites and it looks like i have the CHEAPEST RB25 ENGINE FOR SALE @ $1500 FOR A COMPLETE STOCK MOTOR MINUS TURBO.

SOMEONE SHOULD SNATCH THIS UP IT IS AN ABSOLUTE BARGAIN PRICE!!!!!!!!!!!

will give u 700 for the motor with no turbo no looms no harness no coilpacks

hey mate,

700 is peanuts for a healthy motor, even without turbo and all that other stuff.

I'll measure the cooler up tmrw and post pictures for everyone to see.

Have replied to all PMs, and anyone requesting pictures of the cooler or TEINS let me know i will be sending those pics out tmrw afternoon

Thank you everyone

Alitan - i'm quite firm on getting $1500 for the motor as it is i believe that is cheap enough already. At this stage i'm not willing to take any further parts off it.

Ash - i have already told ppl that i am including the c-spanners in the coilover package , if this changes i will lete u know.

Everyone waiting on pics of the cooler and coilovers, i wont be able to get them to you guys tonight as due to work i was unable to obtain pics of them before the wrecking yard that my car in sitting shut, so i will have to get them to everyone tmrw.

Thanks everyone for their patience, i have been completely inundated with requests and am doing my best to get back to you all in a timely fashion

Thanks again

Nzm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...