Jump to content
SAU Community

Recommended Posts

Well after doing some searching on this site I've noticed most info is for the older stageas. I just recently purchased a 2001 m35 rx300 the one with the VQ30DD. Anyway I have a lot of questions and was hoping some people here could fill me in.

I know that the chassis are shared with the G35 and Z33 does this mean that suspension parts are interchangeable? If so what parts? coilovers? LSDs? Also with the engine being a VQ30DD and not the 25DET what parts are swappable with the two? Anyone know of a company that makes a exaust for the VQ30DD?

For wheel sizes, anyone know what max size for a wheel is with rolling and a mild fender pull? I'm planning on trying to get my 18x9.5 +13 on the rear and 18x8.5 +25 on the front.

Anyway thanks in advance for the info or links to info

Jetwreck - See the sidebar, it's Okinawa JP.

:)

OkiM35, there is plenty of info on the M35 on the forums, but if they're anything like the C34, the 4WD models will have different suspension o the 2WD models.

I can't really help too much since I own a C34, but the M35 guys are compiling more information every day.

Jetwreck - See the sidebar, it's Okinawa JP.

I can't really help too much since I own a C34, but the M35 guys are compiling more information every day.

We won't be seeing the VQ30DD over here.

It does not meet power/weight requirements (191kw/1650kg=116.5kw) and I don't believe that any workshop has tried to get compliance for that engine in an M35.

Even if it was eligible, it was not a common engine in the NM35 and was not available in the later PM35.

Most buyers of the NM35 went for the VQ25DD if they wanted economy or the VQ25det if they wanted power. The VQ30DD was the "tweener".

The PM35 only had the VQ25DD or the VQ35DE available

Well after doing some searching on this site I've noticed most info is for the older stageas. I just recently purchased a 2001 m35 rx300 the one with the VQ30DD. Anyway I have a lot of questions and was hoping some people here could fill me in.

I know that the chassis are shared with the G35 and Z33 does this mean that suspension parts are interchangeable? If so what parts? coilovers? LSDs? Also with the engine being a VQ30DD and not the 25DET what parts are swappable with the two? Anyone know of a company that makes a exaust for the VQ30DD?

For wheel sizes, anyone know what max size for a wheel is with rolling and a mild fender pull? I'm planning on trying to get my 18x9.5 +13 on the rear and 18x8.5 +25 on the front.

Anyway thanks in advance for the info or links to info

Suspension for M35 is different between AWD and RWD as Ben said.

There is Nismo S-tune available for RWD M35's. I think that this would be your safest (and best value) bet.

As for parts, body/interior etc are the same as and NM35's and PM35's (with the AXIS/ARX body kits being the exception - unless you put the plastic wheel arches on as well)

Engine/exhaust stuff? Try looking for Y34 Gloria aftermarket parts.

There will be parts that are interchangeable between the VQ30DD and VQ25DET, but don't count on any VQ25DET performance parts fitting.

You may have some luck with VQ25DD stuff or maybe VQ35DE but since the fuel delivery is different (Direct injection vs Electronic injection) is may be difficult.

Those wheels will fit you RWD Stagea beautifully (Nice dish!).

Hope that helps :blink:

We won't be seeing the VQ30DD over here.

It does not meet power/weight requirements (191kw/1650kg=116.5kw) and I don't believe that any workshop has tried to get compliance for that engine in an M35.

Even if it was eligible, it was not a common engine in the NM35 and was not available in the later PM35.

Most buyers of the NM35 went for the VQ25DD if they wanted economy or the VQ25det if they wanted power. The VQ30DD was the "tweener".

The PM35 only had the VQ25DD or the VQ35DE available

Suspension for M35 is different between AWD and RWD as Ben said.

There is Nismo S-tune available for RWD M35's. I think that this would be your safest (and best value) bet.

As for parts, body/interior etc are the same as and NM35's and PM35's (with the AXIS/ARX body kits being the exception - unless you put the plastic wheel arches on as well)

Engine/exhaust stuff? Try looking for Y34 Gloria aftermarket parts.

There will be parts that are interchangeable between the VQ30DD and VQ25DET, but don't count on any VQ25DET performance parts fitting.

You may have some luck with VQ25DD stuff or maybe VQ35DE but since the fuel delivery is different (Direct injection vs Electronic injection) is may be difficult.

Those wheels will fit you RWD Stagea beautifully (Nice dish!).

Hope that helps :)

Yea that actually helps a lot. I'll definitely check out the Gloria stuff. I think the first thing I'm going to buy is some suspension. The Nismo S-tune stuff looks pretty decent, but I think I'm going to wanna go lower than they go. Probably going to end up going with the Teins, due to the fact that I liked how they were on my silvia

Yea that actually helps a lot. I'll definitely check out the Gloria stuff. I think the first thing I'm going to buy is some suspension. The Nismo S-tune stuff looks pretty decent, but I think I'm going to wanna go lower than they go. Probably going to end up going with the Teins, due to the fact that I liked how they were on my silvia

If you have a factory aero kit fitted the s-tune is about as low as most people would want to go, unless you want to loose the front bar :)

If you have the standard kit tho you could go lower :rofl:

If you have a factory aero kit fitted the s-tune is about as low as most people would want to go, unless you want to loose the front bar :)

If you have the standard kit tho you could go lower :rofl:

Yea I noticed you said you had them on yours, do you have a picture with them on your car? Also what what are your wheel and tire specs?

Yea I noticed you said you had them on yours, do you have a picture with them on your car? Also what what are your wheel and tire specs?

There are a few pics in my Garage (top right hand corner), just search for my user name.

Wheel & Tyres are the stock 17's for the moment, upgrading to 19" at some point, performance side of things comes first, then it's handling, cosmetics.

Yea that doesn't look bad at all.

Anyway I was looking on the Tein site and noticed that the code for my car is not M35 like I thought, but it is HM35. Guess the 'H' differentiates the Rx300 from the rest. It isn't on the price list either

http://www.tein.co.jp/search/search1.cgi?a...SAN〈=en

I can see why the awd and rwd models would differ, but I wouldn't think that because the engine was different the suspension would be different as well. Anyone have any info on this? I guess I could just always have my wife ask someone, but half the time she doesn't even understand what I saying if I am talking about cars

Hey Bis-e Bee the forum wont let me Pm you back until I have more than 10 posts. Anyway I'll keep an eye out for you, but to be honest there aren't too many M35s in wrecking yard in Okinawa. We usually get the old crap that people in the mainland don't want anymore. If you can get on yahoo auctions that is probably your best bet. I can check some sites like upgarage and goo parts for you though.

Hey Bis-e Bee the forum wont let me Pm you back until I have more than 10 posts. Anyway I'll keep an eye out for you, but to be honest there aren't too many M35s in wrecking yard in Okinawa. We usually get the old crap that people in the mainland don't want anymore. If you can get on yahoo auctions that is probably your best bet. I can check some sites like upgarage and goo parts for you though.

Thanks Chris :)

The more people I have on the look out the more likely I am to find out.

Anything you could do from that end would be greatly appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...