Jump to content
SAU Community

Recommended Posts

post-61711-1245932978_thumb.jpg

post-61711-1245933063_thumb.jpg

post-61711-1245933341_thumb.jpg

post-61711-1245933458_thumb.jpg

post-61711-1245933531_thumb.jpg

post-61711-1245933723_thumb.jpg

post-61711-1245933851_thumb.jpg

WHITE 1992 R32 GTR~ CONTACT NUMBER : 0423682131

MODIFICATIONS:

OHLINS adjustable coil overs

HKS 3 inch split dumps

HKS 4 inch exhaust with silencer.

WORK EMOTION 17*9 inch wheels with +17 offset and 70% tread.

GREDDY t517z turbos under 5000 kms old

BLITZ blow-off valves

K&N pod filters

CUSCO front & rear strut braces

BLITZ turbo timer

APEXI boost gauge, car is running 0.8 bar.

N1 head lights

NISMO cluster

CUSTOM made oil cacth can

The over all condition of this car is pretty much immaculate, i just got the front lip sprayed, so exterior wise the car dosent need anything else done. as for performance if i keep the car i will put an aftermarket computer and change the injectors and fuel pump. The car is on 89 000 KMS annd the interior is surprisingly in very good condition. It also just had the 5000 kms oil and oil filter changed. With computer and injectors the car should be close or maybe over 300 kw.

ALL MECHANICAL INSPECTIONS ARE WELCOME!

PRICE: $21 000 VERY NEGOTIABLE.

I WILL SELL THE CAR FOR CHEAPER WITH OUT THE WHEELS. IF YOUR NOT HAPPY WITH THE PRICE THROW ME AN OFFER AND IM SURE WE CAN WORK SOMETHING OUT.

NO TIME WASTERS IF YOU HAVENT GOT THE MONEY DONT WASTE MY TIME.

cheers.

Edited by loky
Link to comment
https://www.sau.com.au/forums/topic/276446-white-r32-gtr-with-good-mods-1992/
Share on other sites

willing to swap for a 97 523 BMW with rebuilt engine and rebuilt transmission less than 2000kms since rebuild. Stock, immaculate interior and mechanically A1?

Swap without the rims as i got rims already?

PM me if you are interested, cheers mate :D

lol what can you do.. if you want it so much fly down this way... GUYS IF IM GOING TO GET OFFERS FOR SWAPS LETS BE REALISTIC I WONT STRAIGHT SWAP THE CAR FOR A VX HOLDEN COMMODORE V8..

ok guys car is sold next week end. unless someone makes me a genuine better offer then what ive got now i might concider it otherwise car is sold pending payment. cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...