Jump to content
SAU Community

Recommended Posts

ELECTRICAL

Splitfire Coilpacks Suit RB26 - Used for 3 month $450

Defi gauges - White face (COMPLETE MATCHING SET) 4.5" tacho $350

60mm Water temp $230

60mm oil temp $230

60mm fuel pressure $230

60mm oil pressure $230

60mm boost $200

All with stands, wiring, sensors and control box $1350 for the lot or will seperate.

2 x Nissan AFM's, RB series with green label comes with HKS air filter (green filters) $250 for the pair

FUEL INJECTORS

SARD 1000cc Top Feed Injectors, cleaned and flow tested. These will flow 1200cc at 60psi of fuel pressure!! $800 (brand new these are $280 per injector!)

Apexi 600cc Top Feed Injectors, cleaned and flow tested. $600

TURBOS/MANIFOLDS/WASTEGATES

T04Z Turbo kit includes Garrett T04Z turbo (0.82 split pulse rear V-Band) Turbo comes with feed line and drain. Turbo has been recently removed and had rear housing HPC coated. this alone cost me over 240 dollars and the turbo has not been used since. Turbo is in excellet condition. selling $1500

6Boost high mount split pulse Manifold $700 set up for tial 44mm wastegate. can be modified to suit another size if need be.

ENGINES

FORGED RB30/26 4WD!!

RB30 Block – extensively prepped, drilled to suit bigger head studs, bearing caps grooved etc

RB30 Crank

King Bearings – brand new

Spool Rods

CP Pistons with brand new rings

ARP main Stud

Custom RB26 sump adaptor plate with CHROME MOLY main caps

ARP Head Studs RB26 size, block is drilled and tapped to suit

Tomei Metal Head Gasket

Tomei Oil Pump & Collar

R32 GTR Head

Extensive Porting

270/270 10.8mm Lift Tomei Profile camshafts

+1mm Stainless one piece valves on Inlet & Exhaust

BC Valve Springs and Titanium Retainer kit

Painted RB26 Covers with -12 weld-ons

Gates Timing Belt

N1 water pump

Rb26 Sump (larger one can be supplied if needed)

All machining and assembly complete

$13000

STANDARD RB26DETT ENGINE - Comes with the following parts

complete inlet side including plenum, TB's, fuel rail & inj's

Complete set of covers

Cam angle sensor

turbos, manifolds, std dumps

standard flywheel

coilpacks and coilpack loom

$2900

DRIVETRAIN

PPG Straight cut gearset (1st-5th), fully rebuilt and reconditioned with new dog gears, PPG billet selectors, upgraded input shaft (Hollinger Spline). Comes complete with NPC twin plate clutch to suit, bearing carrier and everything required for it to be complete bolt in item. $8500

SORRY PEOPLE I FORGOT TO MENTION THAT THE GEARSET IS IN AN RB25 CASING. IT CAN BE PUT INTO AN RB26 CASE AT EXTRA COST IF NEEDED. THIS IS FOR A CONVERSION I NEVER GOT AROUND TO DOING.

INTAKE

Hypertune 90mm Plenum and Hypertune Throttle Body $2500

COOLING

GREDDY Alloy Radiator R32 GTR $950

MISC

Safety 21 (pretty sure that is the brand) R32 GTR Half Cage (bolt in) with bolt in side intrusion bars. Bars are 40mm diameter. $750 comes complete with all plates and bolts.

Large Oil Cooler -10 fittings $150

WHEELS AND TYRES

Starcorp Wheels 18x9.5 & 18x8.5" rims only $800

R33 GTR Wheels rims only $900

Koya Racetech 18x9" Wheels (4 X) Black centre, polished lip Fitted with brand new 265/35R18 Federal 595 SS tyres $1000

Koya Racetech 18x8" Wheels (2 X) Black centre, polished lip Fitted with brand new 235/40R18 Federal 595 SS tyres $500

Edited by GTRHOLIC
  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Are you the new owner of GOJIRA? the townville car that was recently sold?

Impressive parts line up Free Bump

Yeah this was my old car. Last time i drove it, it had a fully built motor from Racepace Motorsport including N1 block, a T88 and a trust 6 speed dog box. New owner obviously has some new plans for it. Good luck will the sale of your parts and look after it :P

any body know the guy selling all the stuff?

Hes been on the forums be my self and other members have tried to contact him and he does not seem to reply.

If any one knows him can you let him know there are some keen buyers trying to get in contact with him.

Cheers keiron.

The guy is on holidays! Try contacting TRENT at Mercury Motorsport!!

6 Boost manifold SOLD

Yep already talked to trent this morning very helpfull fellow indeed,He seems to be taking care of the sale of said parts guys.

Give him a call for sure if your chasing up any of the items posted im sure he will be more then happy to help you guys out.

The owner is busy with work commitments atm as far as im aware and has no time to organise.

Cheers keiron

Edited by Gtir-keiron
  • 2 weeks later...

Well i dunno what to think now.

Trent from mercury answer his phone from day one i talked to him on the 6th of this month agreed on a price for the airflow meters he told me they would be sent out friday the 7th.Come tuesday i rang him again asked if they had been sent out he told me he had asked one of his employee's to do it and it was still sitting on the bench and he would get it out asap,

So thursday the 13th again get get home from work and still no air flow meters,Again i ring him again he answers and i must admit he has ans the phone every time i called and tells me he will chase it up with australia post and ring me on friday.

Friday the 14th comes and its late afternoon and still no parts turned up and no phone call from trent and mercury motor sport so i try and ring him,Has not answered the phone when i call for the last 5 days and still no parts.

To recap i went to his bank direct deposit cash into his account ring him to let him know hes all happy said he would send the parts and nothing since the 7th of this month and now its the 18th.

What are you ment to do?

Well i dunno what to think now.

Trent from mercury answer his phone from day one i talked to him on the 6th of this month agreed on a price for the airflow meters he told me they would be sent out friday the 7th.Come tuesday i rang him again asked if they had been sent out he told me he had asked one of his employee's to do it and it was still sitting on the bench and he would get it out asap,

So thursday the 13th again get get home from work and still no air flow meters,Again i ring him again he answers and i must admit he has ans the phone every time i called and tells me he will chase it up with australia post and ring me on friday.

Friday the 14th comes and its late afternoon and still no parts turned up and no phone call from trent and mercury motor sport so i try and ring him,Has not answered the phone when i call for the last 5 days and still no parts.

To recap i went to his bank direct deposit cash into his account ring him to let him know hes all happy said he would send the parts and nothing since the 7th of this month and now its the 18th.

What are you ment to do?

not sure what 2 do there buddy, but thanks for posting that cos 2morrow im supposed 2 transfer $8,000 for the gear box .. let me no when this issue is sorted

not sure what 2 do there buddy, but thanks for posting that cos 2morrow im supposed 2 transfer $8,000 for the gear box .. let me no when this issue is sorted

Well they lied to me for 2 weeks telling me that the stuff has been sent and they would check australia post blah blah blah, till i threaten to have some one go down there and get the stuff i paided for and then all of a sudden they were sent today.

And people wonder why they get a bad name.

If he had been honest with me instead of lieing to me there would have been no fkn problem.

Im just pissed because they were not honest with me from the word go,Now i just have to hope they send me what i paided for.

I still dont have the items so we will see how honest they were this time about sending the items i paided for.All friendly when taking money off me till it came time to send the stuff off i really hate that.

Hi all! Wow! So much has happened! Im back now. I just spoke to my mechanic and the AFMs have been sent. I have the money for the PPG and buyer has recieved PPG already so i dont know whats going on there. For anyone that has any problems please contact me directly. I will ensure that any outstanding issues will be sorted quick smart.

yep they turned up today.

Sent yesterday turned up today.

If only they had sent them when they said they would 2 weeks ago there would have been no problems from my end and i would be saying how happy i was to deal with Mercury.

Even if they had applogised and gave me a reason over telling me porky pies and having me ring them every day for 2 weeks.

Im happy now they are here tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...