Jump to content
SAU Community

Recommended Posts

Details as follows:

1990 R32 GTS-t Mspec

RB20 motor with 70,000ks

strong RB20 gearbox with C's short shift kit

TD-06 20g L2 turbo kit comes with lines manifold, 3" dump, external gate (just rebuilt with new gaskets and 1bar spring) with screamer fitted. (Full GReddy kit)

HYBRID GT FMIC with GReddy hotpipe

Just Jap oil cooler and relocation kit (brand new)

APEXI power intake (brand new)

NISMO dash

BRIDE Zeta III sport drivers seat (standard passengers seat)

2 way

TEIN shocks and springs

16" RAYS Syver rims with legal rubber

front and rear strut brace

Cyclops Alarm & GReddy TT

PLUS OTHERS

Just fitted: HKS 264 cams, Tomei 555's, Z32, GK Tech cam gears (new timing belt) Fresh MOTUL 300V chrono oil, fresh gearbox/diff oil, brand new fuel & oil filter.

Replaced all the exhaust manifold studs/bolts, i have a full set of (brand new) Trust gaskets for the turbo and a new manifold gasket as spares.

Car is all finished and ready for final tuning.

Offers around 14k ono or trade depending on said vehicle.

NOW WITH 6 MONTHS TASMANIAN REGISTRATION

1.jpg

5.jpg

Cheers GMB

Link to comment
https://www.sau.com.au/forums/topic/278410-fs-r32-gts-t/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...