Jump to content
SAU Community

Horn Fuse

dozey05

By dozey05,
in General Maintenance

 Share

Recommended Posts

dozey05 Collaborator

dozey05

Posted
Posted

hey guys

just wonder about my horn

it dont work and so i checked my fuse and yea the horn fuse was busted

so i went and got some new fuese from supercheap

and i put them in and i went and tested the horn nuffin and all i heard was the fuse go bang

i thought maybe just a dud fuse so i put another in and tried and before i knew i used the hole packet

does anyone know whys this is happnin?

is it coz the fuses are cheapo or do i have another problem?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/278885-horn-fuse/
Share on other sites
2LV8ETR Mentor

2LV8ETR

Posted
Posted

You've got a short somewhere dude.

A process of elimination will help to track down the culprit.

1: Does the fuse blow as soon as you put it in, or when you press the horn button?

2: Remove the wires from the horns and press the horn button. Did the fuse blow?

3: If no, replace the wires to one of the horns and try again. If the fuse blew, it's that horn that is toast. If not, remove the wires from the good horn and try them on the other one. What happened?

4: Replace the relay in the engine compartment electrical box.

Is the problem solvered?

Link to comment
https://www.sau.com.au/forums/topic/278885-horn-fuse/#findComment-4710910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      gtr hood match gt/gtt front fenders?

      By JC71 · Posted

      would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...