Jump to content
SAU Community

Recommended Posts

wouldnt really recomend putting them in the kick panels, tweeters are great for raising the sound stage and lifting the whole sound up of the floor, to put them in the kick panel would sort of defeat that purpose. A piller is a very popular place to mount then or the door sail (the little pannel that covers the bolts for you rear view side mirror's). either of those are good locations. the sail is the best as it is one of the cheaper parts to replace. i myself have actually just wedged them between the window and the dashboard. sounds dodgy but no holes or anything cut into any panels and they look mint.

and untill i have money to make custom moulds on a pillers thats were there staying.

  • 2 weeks later...
wouldnt really recomend putting them in the kick panels, tweeters are great for raising the sound stage and lifting the whole sound up of the floor, to put them in the kick panel would sort of defeat that purpose. A piller is a very popular place to mount then or the door sail (the little pannel that covers the bolts for you rear view side mirror's). either of those are good locations. the sail is the best as it is one of the cheaper parts to replace. i myself have actually just wedged them between the window and the dashboard.

Problem is the the speakers have not been listed and wether the midwoofers have been mounted in stock locations. Being a West Austrailan SQ judge ive heard many different set up's. Using the kick panels can be a great way to achieving depth in a system it all depends on what speakers are being used. The stage height normally wont be as high but with good equlisation and speaker directions it can be fixed. What i would do is allow the tweeters to be moved around while wired up and try blue tacking them in a range of places to get the best results. You'll most likely find the tweeters will probably perform there best in the far back corners of the dash/a pillars aiming at the other sides head rest. Sail panel while being cheap and easy may not get the depth your chasing... thought i would add my 2 cents.

agree with everything you say, as yes sail panel is a cheap and easy option thats the reason i offered that location for the people out there who dont want to spend lots of money geting custom made a piller mounts or things like that. bluetacking is a very good option aswell. all in all i am really just agreeing with everthing you say. but like you said adding mt 2 cents

just use the surface mounting hardware, put them on the a pillar. if you need to remove them, just get a new pair of pillars, its not like its a brand new car or anything. just make sure you test them with bluetack first, like the others mentioned.

  • 2 weeks later...

I have mine installed up on the A-Pillar. I've attached a couple of pics to show L&R, they look reasonably standard so they don't attract too much attention from prying eyes.

Pardon the shit pics...

post-36287-1251269157_thumb.jpg

post-36287-1251269331_thumb.jpg

Edited by -Stokesy-

Not something i would have ever chosen to do but the previous owner of mine surface mounted the ones in my car in the door card. They actually work quite well there. I dont go much on cutting huge holes in the doors but if your not planning on ever taking them out i guess its ok...

That's not really true there are many advantages to having your tweeters in the kicks:

- There's more room

- They're not on display

- They're an equal distance from the listener as the mids

- you can create a deeper sound stage as they are further from the driver

Just have a play around with different locations and see which sound you prefer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...