Jump to content
SAU Community

Recommended Posts

Any other joints in Perth mentioned possibly starting a test facility?

Assuming the government is doing some bussiness under the table with Kostecki's, I'd bet theyre going to harrass any little workshops out of staring another test facility. Whatever corruption it takes to make us import drivers extinct.

I call for another wave of protests, complains, and a Skylines Australia political party in the house.

Between this, new hoon laws and growing requirements to make a car road legal, I can garuantee the SAU forums will be completely inactive in 5-10 years time.

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

Gents,

Warning for the thread,

Any acts of criminal damage, or suggestion will not be tolerated.

I have deleted two posts already in regards to this.

There will be no soft warning on the next post that I feel is in line with these ridiculous comments!

ive always said the we are a country run by children or maybe i should say leemings cause if one poli jumps off a cliff im sure the rest will follow.

this emmissions thing cant be too bad tho cause the japanese have a 5yr or 100 000 kms policy then its a new engine rebuild or trade-in time i think, and the street car scene there is rollin out fine.

also i dont think its the murdoch cops cause there was a WRX hatch unmark cop car down my way that had pulled up some random in an old integra that i went past today and i was packing myself cause i was speeding at the time too lol

Simple, don't go through the pits to do your mods, just do them, then hope you don't get yellow stickered :banana:

The one of more impact is

In addition, the following applications require an IM240 test from 1 December 2009:

o Newly imported vehicles manufactured prior to 1989.

Which is a way to stop grey imports under the 15year rules etc.

With only one place in WA that can do it, the queue will be a couple miles long :bunny:

Now THAT is one fked up law... cars that were made and fall under emissions laws from that era are never going to pass even in stock form.

Sounds like you guys are heading the way of Victoria - totally fked up for no justified reason.

No it isnt ...

hehe, you mean not just yet :banana:

This is how it's gone down in Vic basically... The first set of laws and EPA enforcement open the door for the rest of the stupid Gov't bodies to then go and create laws and rulings upon laws and rulings... basically making it impossbible to own a reasonably modified car and have it street legal.

The EPA full test in this state is over $2,500 - And the catch is simple - If you fail the test say goodbye to your cash. You dont get another chance, you have to pay another full fee.

Yet in NSW you can do it much more reasonably, all for around $700 i believe which is much more acceptable.

WA will just turn into a state now where the Gov't will be more concerned about defecting cars than Policing real crime - Same as Victoria is these days.

If Victoria pulled the traffic cops of defecting cars for a BOV or a "H" pattern on a gearknob - the crime rate would drop ass out within 6 months... but then you don't have any donut money

I had to undergo this test with my VL (RB25DET Convo) a couple of months ago, if I had visited the pits 7 days earlier, the IM240 would'nt have been set in place! It sucked. Cost me $2,100 overall, which included a new CAT which they installed halfway through the testing. Kostecki is the only place who can run the tests officially at the moment, and they charge an absolute bucketload.

My advice is, get them to install a CAT (was around the $300 mark) straight off the bat! It will save you a lot of money for all the initial tests they do before they tell you it's failed (which is pretty much inevitable).

It's not impossible to pass, it's just very difficult, even for some cars straight out of the factory. Get a decent CAT installed and you should be fine.

Good luck with it everyone, don't let this hold you back from modifying :-)

Joel

sorry for the previous comments, was just a joke.... obviously

i smell bs if only 1 workshop is doing the testing, some corruption could be going on between someone in government and kosteckis as nic-a31 already suggested, do we stand around and accept these bs laws? a protest is not a criminal act... it is an option if the joy of driving our performance cars is at stake for stupid reasons like global warming which isnt even proven to be from humans

i dont even see how that huge price for the 2nd emmissions test is justified? more than double the first test, isnt it just the same test again? all i smell is bs.......

Edited by snozzle

You should all protest out the front of this "Kosteckis" place for a month lol.

If the Gov't has only approved them, you'll get a nice message across as opposed to just protesting out the front of parliament so you'll not only annoy the Gov't by protesting - you'll also be getting a business to make noise to the Gov't, not for the right reason exactly but it'll give it a nice view and probably lots of news coverage :banana:

Oh this is some sh*T news... :banana:

& I just booked in to get a new turbo back exhaust fitted at hyper drive next thurday.

Somehow I'm believe all those rust buckets I see driving around with black smoke comming out from their exhaust will NEVER get send to do the test by the cops...

When I had to do the IM240 at Kostecki I was charged on their hourly rate, which was in relation to how many tests my car had to undergo. So, the more times I was tested, the more hours it took, the more it cost. I am fairly sure it isn't more expensive the "2nd" time you attempt it, it's just obviously going to cost more because of the hourly rate. My car took 15 tests to pass (as the engine got warmer, my emissions readings improved, but never quite made it; so they intervened and installed the new CAT and ran a few more tests until it passed).

Don't hold me to this, but I have been through the process and it seems as though it's charged on an hourly rate, not set prices per test!

Joel

^^^ Like he says & as I've already said on a related thread in here somewhere, I want to know ; (1.) How we corner the import lisence for the Gas Analysers that are ADR approved, (2.) Where we (us old un-employed revheads) can be retrained on some Govt., sponsored scheme to run the tests. (3.) When do we start. :banana:

Cheers GW

Orbital Engineering but I'm not sure they're open to the public or if they are it's severly cost prohibitive.

The old R&D automotive company I used to work for had an old 5-gas analyser and 3x engine dynos.. maybe I should give them a call :banana:

We're also several thousand years overdue for a swap of the poles, when that happens shit will really hit the fan.

Heh when that happens the earth's magnetic fields will swap and all of our hard disks and anything that relies on a magnetic field to work, will be completely screwed! LOL

Anyways, back on topic....i took my car over the pits just under 2 weeks ago and i didn't have to do one of these tests? And u can clearly see my car has been modified....

Heh when that happens the earth's magnetic fields will swap and all of our hard disks and anything that relies on a magnetic field to work, will be completely screwed! LOL

Not just equipment but our bodies and pretty much all of nature (flora & fauna) rely on the earths magnetic fields in some way.

GROUP BUY -Kostecki ADR Approved Cats anyone?

id be interested to see how my POS gemini would go with its 1.6ltr of fury with straight thru exhaust which is legal due to cats weren't invented yet.

^tho in saying that, my gemini isn't worth 2k let alone 3 or more if it fails lol :P

Edited by Char
GROUP BUY -Kostecki ADR Approved Cats anyone?

He wouldnt discount them for anyone....he doesnt need to lol

Made a few phone calls today and their are alot of people unhappy about it.

There will be within 6 months, more options of places to get the test done. Several machines are in Perth at various places, its just a matter of getting it certified which is what others are doing at the moment. No doubt it will be a huge paperwork trail for the companies etc etc hence it taking time to sort through it all.

Once there is some competition for the test, the price will come down.

These tests were first bought up 2 years ago and Kostecki's were the only company to get off their arse and do something about it so i don't really blame them for making what they can out of it til others decide to get their sh** together

Not just equipment but our bodies and pretty much all of nature (flora & fauna) rely on the earths magnetic fields in some way.

and whats worse is it doesn't do it straight away. so we get cooked by solar radiation for years, before it flips around. then our starter motors go the wrong way round :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...