Jump to content
SAU Community

Recommended Posts

OK guys, CEFFY HUDDLE!

5 stud hubs - WHERE CAN I BUY THESE ?

I'm hesitant to buy the JJRs from JustJap because of their amazingly low price....but I can't find any others around.

Suggestions please??

Today I cut up my stock Ceffy airbox to hold a pod, shield heat away from it and draw in cold air. WA laws are that pod filters need to be secured to the body via two different points.

Basically, the pod bolts inside the box (other side of the AFM), hence why half of its cut out....and half of the top is also cut out to accommodate it...so it has the snorkel directing cold air in from the top, as well as 2 flex pipes coming up into the bottom of the air box, which are drawing are from below the front bumper.

Now its time for a new K&N M'S....that exhaust leak a few months back killed it for good...I've dispensed an entire K&N recharge kit on it and it's still clogged really badly :(

Pics to come.

Other progress is coming along good.

I connected a charged battery back up to it last night, wound the windows down so I can take them all out, and send them off with the new quarter panels to be tinted (legal) and so I can get in and sand/prime/paint the insides of the doors and shit.

Dash has come back, cut up in a few places from the dashmat maker dudes so I'm looking for a new dash. Re-colored all the solid interior, still getting through respraying all the seats and door trims...but looking better already :cool:

Next step is to get 5 studs and brake fitment happening and then get it rolling on some black 17" Drifteks, get a 3" turbo back made up (painted black, for stealth spec), bring it back, re-sand and re-prime it (it was fine when I got it but months out in the weather + months in the shed collecting dust and other nasty shit, I'd rather do it again), paint it, tidy up the trim and engine bay and, all done....the light is getting a little brighter now, finally :)

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-4989231
Share on other sites

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

OK guys, CEFFY HUDDLE!

5 stud hubs - WHERE CAN I BUY THESE ?

I'm hesitant to buy the JJRs from JustJap because of their amazingly low price....but I can't find any others around.

Suggestions please??

Dude, use the other forums... Look on nissansilvia.com, that will be the place to start.... or even a Japanese parts trader that will post to your door.

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-4993079
Share on other sites

Ive seen a few on ImportMonster, its just buying unknown brands I'm hesitant on doing.

I'd much rather fork out extra dollars now than extra extra dollars later when a shitty china spec stud snaps and the other 4 go with it while driving along...

I'll hit up N'S.

Cheers dude.

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-4993156
Share on other sites

  • 4 weeks later...

Just an update on this...I'm currently doing some research, and pretty sure I'm going to ditch this heavy-ass RB20DET and go for a VQ30DET (possibly DET+T)... depending on how many legal hoops I have to jump through and weather or not IM240 emissions testing returns any time soon.

Been tidying up the car a bit the last few weeks, no major progress..just waiting for more money to throw at it (hence the silly idea I've got in my head in the mean time).

Will keep you all posted :)

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-5055603
Share on other sites

yeah it'd be a good idea to sand and re-prime everything you've primed (acrylic?) primer is pourus so being in the rain etc = bad (i'm a spray painter by trade) , most 2k primers are ok though , actually if you can , use 2k primer . what ever you do , don't paint it matt/satin/chassis black , it will make painting it properly twice the work (that stuff isn't nice to face/rub) . as for the 5 stud , i'm using the jj front hubs and they seem to work fine (i've only done about 1000k's on them but 2 drift days of hitting ripple strips on full lock with modded knuckles they still seem fine ) . No love for the rb? :) imo you should aim higher for an engine transplant , google search vh41 :D or the vk series :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-5062598
Share on other sites

You think a VK will fit?

I've seen a VH fitted in a ceffy (with no bonnet)...but theyre smaller and heavier...the VKs are a bit bigger but alot lighter...would be keen to measure one up and see if it'd fit for a track car.

The primer that's on now is 2 pak..but its copped it bad being outdoors for soo long...and I've been using the bonnet as a workbench, so I've sanded that down a few times and its uneven, even down to the metal in some spots...I'll even the primer down as much as I can, but when it comes to paint time, I'll get them to redo the primer if need be...paint is another thing I'll be paying alot of attention to.

What about the stuff I have painted already?

I've done underside and inside the wheel wells in chassis black...engine bay in acrylic chip resistant black..and with inside the doors and shit..I sanded it down, 2 coats of acrylic primer...3 coats of black, 2 coats of clear coat (but it still chips really easy...so I might sand that back as well and just fork out more $$ for 2 pak when I get the whole car done) ... reckon I can get away with that? or sand it down and go the whole 9 ?

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-5062616
Share on other sites

We did get them in Maximas, but they put them in sideways, so it doesn't count.

I'm sure a VH would fit. VH45 in S14 and VH45 in S13. A31 has more space under the bonnet than an S13.

VK MIGHT fit. I wouldn't want to be the one to find out that it doesn't.

Link to comment
https://www.sau.com.au/forums/topic/279725-ceffeh/page/4/#findComment-5062682
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...