Jump to content
SAU Community

Recommended Posts

Hi, i went to my mechanic today so he can install my Turbotech boost controller.. He recons i need a gauge.. anyone know a cheap one i can get? and he also recons my Current Exhaust is too thin for my car to be boosted anymore (i want 11psi) do you guys recon my exhaust will be fine or i should get a new one..?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/280047-boosting-r33-gtst-questions/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

what exhaust do you have? if it is stock then no, don't boost it anymore as it isn't going to be good for the turbo. it will keep in the heat and shorten the life of the turbo. you really need a 3" turbo back system.

as for gauges, just get a cheap $50 drift one

what exhaust do you have? if it is stock then no, don't boost it anymore as it isn't going to be good for the turbo. it will keep in the heat and shorten the life of the turbo. you really need a 3" turbo back system.

as for gauges, just get a cheap $50 drift one

+1 to the exhaust question.....get a good aftermarket 3" turbo back and then you can run around 12 psi with a nice FMIC.....

Its never a good idea to boost it to 11psi with a stock as a rock setup mate.....installing a aftermarket exhaust and intercooler will let the boost creep up a bit anyway...from 7psi (stock) to about 9psi (ish)....i used my mates gauge (that read in PSI) to set it up and after about a week of not noticing any spikes i took it off and never had a problem...but in saying that get an EBC if you can

Edited by Krishy

hey mateee...

i was in the same position as you abotu a 2 years ago.. i started of with a3 inch turbo back exhaust.. that s very imporant to hav when boosting ur turbo, as it will definately help the turbo boost to 11psi. and ul also need a fmic. onyl thing is once u boost the car, u myt find ur car runnign rather sluggish.. i rememeber with my car, it kept jerking because the boost kept cutting out, due to the factory computer. and eventally the computer will reset.. sometimes my car woudl stall and turn off while i was driving. so becareful before u boost ur car.. ask ur mechanic about what i said b4 u boost it.. the onyl i fixed that probelm was i bought a greddy e-manage.. and tuned on the dyno n havent had a problem since. besides epa lol

far out forgot to say i yeah i got a 3 inch exhaust catback.. he said its ceramic.. and that it'll break if i boost it too much..he sed it can't handle more boost.. so i was wondering what would happen if i do boost it and leave the current exhaust? also my mufflers kicked in a bit. does this ruin performance? lol. Thanks for the replies

Edited by richar
far out forgot to say i yeah i got a 3 inch exhaust catback.. he said its ceramic.. and that it'll break if i boost it too much..he sed it can't handle more boost.. so i was wondering what would happen if i do boost it and leave the current exhaust? also my mufflers kicked in a bit. does this ruin performance? lol. Thanks for the replies

get a 3" cat and a dump/front pipe as well. no point have a 3" exhaust if the first 1m of exhaust is still the tiny stock one.

i would also suggest a fmic for running the higher boost. it isn't so bad in winter, but come summer you want it because it will make a big difference to inlet temps if you drive it a bit hard. the stock cooler suffers from heat soak pretty quick.

far out forgot to say i yeah i got a 3 inch exhaust catback.. he said its ceramic.. and that it'll break if i boost it too much..he sed it can't handle more boost.. so i was wondering what would happen if i do boost it and leave the current exhaust? also my mufflers kicked in a bit. does this ruin performance? lol. Thanks for the replies
if you boost it to much you will do this to your turbo....with the stock turbo i have been told 10psi is good but it safe up to 12psi

Get a dump/front pipe as well mate....just a cat back isnt really good enough when increasing boost....my mate has a R33 S2 and i have a S1....we had both on the dyno and running same boost i made a bit more power then him as he just had a catback.....Dents along the exhaust piping can make a bit of a difference but wont be getting worried about that just yet.....

You can boost the stock turbo up to 14psi but to be safe and if you want a longer lasting turbo run it at 12psi....I have been running 12psi for about a year now and its going strong....had it up to 14psi for a long time but thats before it got all tuned up and shit...on 14psi the boost was dying towards the end of my dyno graph but on 12psi it holds it strongly all throughout....

yeah i also ran 14/15psi for about a year without any issues. but you need an aftermarket ecu to go above about 12psi. and depending on how you drive, you might not want it that high anyway. especially if you want decent fuel economy. the higher boost you go, the worse your fuel economy gets

yeah. im keeping it at 11psi.. just to be ont he safe side.. what im worried about is my Ceramic exhaust, MY Mechanic is saying that i need a new 3 inch catback because my current ones really thin and if i boost my turbo to 11psi it will just break the exhaust? Whats your opinoion guys, thanks for the replies

he would be talking about the ceramic exhaust wheel on the turbo, which tend to fail when run at higher boost levels (although plenty have also failed at lower boost, so go figure). i have never heard of a ceramic exhaust. i have heard of ceramic coated exhaust though, and that is nothing to worry about running high boost through.

yeah. im keeping it at 11psi.. just to be ont he safe side.. what im worried about is my Ceramic exhaust, MY Mechanic is saying that i need a new 3 inch catback because my current ones really thin and if i boost my turbo to 11psi it will just break the exhaust? Whats your opinoion guys, thanks for the replies

11 or 12 psi is no problems if you have the supporting mods for it. By supporting mods i mean turbo back exhaust, FMIC, coilpacks if possible and that should be no issues there...Cat back doesnt really help as its only flowing higher from cat back, but before the cat is where the action is so to speak.

No need for coil packs unless the standard ones are shot, plently of people have made 500+hp with the standard coils,

IMO dump/front pipes do stuff all with a standard turbo and ive got back to back time sheets to prove it

i think he meant my catback was too thin, and if i boost my turbo .. my 3"catback won't be able to handle it and it'll break my exhaust.. lets say if it does break.. would it just be my exhaust? or will it damage other parts aswell.. cos what im thinking is i may aswell keep my exhaust til it does break (if it does) rather than buying a new one.. and i dont have a fmic.. do you guys think i need it for 11psi?

maybe you misunderstood him and he was saying your exhaust turbine is ceramic and if you boost it too much you may break it.... which makes sense.

because i don't think you have a ceramic exhaust and i don't think its too thin... unless you made it with coke cans :D

Really why run the risk with the turbo? it's not like you will ever get good performance out of the stocker without modifying it... Leave it stock to minimize the chance of turbine failure. If you want performance get it high flowed or a new turbo.

your exhaust shouldn't break from extra boost, unless maybe it is made out of a wet paper bag.

i would ask him what exactly he meant by your exhaust being too thin.

and while turbo back exhausts might not add much to how fast you run over the 1/4, they do help as far as turbo life goes. having a larger pipe allows the hot exhaust gases to move away from the turbo quicker, thus reducing the chances of turbo failure

No need for coil packs unless the standard ones are shot, plently of people have made 500+hp with the standard coils,

IMO dump/front pipes do stuff all with a standard turbo and ive got back to back time sheets to prove it

I beg to differ

Me and my mate ran our 33's on the same dyno like 15 mins apart on there was a difference between mine and his and we have exactly the same mods except i have a full zorst and he had a 3" cat back....the difference was i made 180rwkw on 7psi and he made 173.5 on 7psi.....

Now that can be put to a few factors/variables ie motor life and how fresh it is etc etc...but i certainly felt a difference when i had my exhaust put on.....it sounds better at the same time flows a lot better too

7kw can easily be put down to motor variables, but could also be the front pipe as well. i didn't really notice any gain from putting mine on, but then i only put the dump pipe on there. the front pipe had been on there since before i bought the car (had a 3" front pipe and the rest of the exhaust was stock, LOL). it certainly isn't a "OMG that is so much more powerful" kind of mod.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...