Jump to content
SAU Community

Recommended Posts

The closest aftermarket thing to have a TPMS in your V35 is to buy a kit online...Forgot the name of the kit, but you'll find it would set you back around $200-ish dollars from Taiwan. They screw onto the tyre valves and have an anti-theft mechanism. The batteries on the valve units are supposed to last 1 year....

I suppose the kit works as I saw a retailer at a 4x4 place sell the same product (same brand) for $350....

Just search for [tyre monitor] on eBay...

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4733269
Share on other sites

hehehe....

or if you really got money to burn, buy some run-flats with the TPMS!!! My wife owned a Mini Cooper S in Dubai (with the factory TPMS and run-flats) and the combo worked great!

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4733292
Share on other sites

The closest aftermarket thing to have a TPMS in your V35 is to buy a kit online...Forgot the name of the kit, but you'll find it would set you back around $200-ish dollars from Taiwan. They screw onto the tyre valves and have an anti-theft mechanism. The batteries on the valve units are supposed to last 1 year....

I suppose the kit works as I saw a retailer at a 4x4 place sell the same product (same brand) for $350....

Just search for [tyre monitor] on eBay...

Why bother with sourcing aftermarket, just get the Infinity option!!!!!

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4733468
Share on other sites

  • 1 month later...

When there's less than 75mm of rubber between the road and the lip of an expensive set of 20" rims, you'd want to know when the tyre is deflating rapidly from a punture so you can pull over before any damage is done.

Edited by mosoto
Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4804807
Share on other sites

not sure what size rims everyone has but low profile needs high(ish) pressure.

I keep my 18's at 38-39psi and I can normally tell if it drops by a couple of psi.

the Manufacturer always underestimates the value by about 8% and I always raise the psi by about 3 or 4 psi on 36.

I love seeing people driving around on flat tyres... until they have to stop behind me!

Having a flat tyre or tyres must handle atrociously.

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4805093
Share on other sites

When there's less than 75mm of rubber between the road and the lip of an expensive set of 20" rims, you'd want to know when the tyre is deflating rapidly from a punture so you can pull over before any damage is done.

just get some run flat tires if you're afraid of damaging wheels.

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4805270
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...