Jump to content
SAU Community

Recommended Posts

The closest aftermarket thing to have a TPMS in your V35 is to buy a kit online...Forgot the name of the kit, but you'll find it would set you back around $200-ish dollars from Taiwan. They screw onto the tyre valves and have an anti-theft mechanism. The batteries on the valve units are supposed to last 1 year....

I suppose the kit works as I saw a retailer at a 4x4 place sell the same product (same brand) for $350....

Just search for [tyre monitor] on eBay...

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4733269
Share on other sites

hehehe....

or if you really got money to burn, buy some run-flats with the TPMS!!! My wife owned a Mini Cooper S in Dubai (with the factory TPMS and run-flats) and the combo worked great!

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4733292
Share on other sites

The closest aftermarket thing to have a TPMS in your V35 is to buy a kit online...Forgot the name of the kit, but you'll find it would set you back around $200-ish dollars from Taiwan. They screw onto the tyre valves and have an anti-theft mechanism. The batteries on the valve units are supposed to last 1 year....

I suppose the kit works as I saw a retailer at a 4x4 place sell the same product (same brand) for $350....

Just search for [tyre monitor] on eBay...

Why bother with sourcing aftermarket, just get the Infinity option!!!!!

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4733468
Share on other sites

  • 1 month later...

When there's less than 75mm of rubber between the road and the lip of an expensive set of 20" rims, you'd want to know when the tyre is deflating rapidly from a punture so you can pull over before any damage is done.

Edited by mosoto
Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4804807
Share on other sites

not sure what size rims everyone has but low profile needs high(ish) pressure.

I keep my 18's at 38-39psi and I can normally tell if it drops by a couple of psi.

the Manufacturer always underestimates the value by about 8% and I always raise the psi by about 3 or 4 psi on 36.

I love seeing people driving around on flat tyres... until they have to stop behind me!

Having a flat tyre or tyres must handle atrociously.

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4805093
Share on other sites

When there's less than 75mm of rubber between the road and the lip of an expensive set of 20" rims, you'd want to know when the tyre is deflating rapidly from a punture so you can pull over before any damage is done.

just get some run flat tires if you're afraid of damaging wheels.

Link to comment
https://www.sau.com.au/forums/topic/280515-tpms/#findComment-4805270
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...