Jump to content
SAU Community

Recommended Posts

hey guys we have the following parts:

RB26 O5U block with some slight scoring of a few cylinders, needs a re-bore to 86.5mm, comes with cradle $400 (no squirters) pick-up

RB26 crankshaft, not sure if its from 32 or 33, how long is the oil drive between the two? $150 pick-up

RB26 conrods, great condition comes with pistons and pins (3 pistons great, 3 with pitting) $160 posted

RB26 polished intake plenum $500 or $300 exchange, need a standard one for testing pick-up

RB26 polished twin turbo pipe $150 no longer needed due to upgrade posted

R33 GTR v-spec turbos with actuators (no shaft play) $400 pick-up

RB26 injectors with fuel rail and reg (16,000 genuine k's) and resistor pack $450 posted

located near Lismore NSW, can deliver up as far as brisbane.

prices are reasonably firm, we are in no hurry to sell. pics will be up soon, for the plenum and pipe, see our other topic

cheers

Pm replied.

also just realised the typo in our topic, the bare block is $500 not $400, still plenty of meat left in it, still has a 86mm bore.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...